itsartflex posts
Posts: 116
Files: 471
Articulated Turkey (Sneak Peek)
Our next design sneak peek I hope you will like it :D
Articulated Baby Peacock (July Design)
Hello everyone,I hope you are all doing great. I'm happy to share our new design, the Baby Peacock, with all of you. It was a pretty interesting project to work on, and the tail mechanism was a lot of fun.The head is a snap fit, while the tail needs to be glued to the body using Super Glue.Here are the basic settings I used on my printer: Layer height: 0.16mm Wall count: 3 Brim (only on the head and body) Infill: 16% Gyroid PLA Works Well Sup...
Articulated Baby Peacock Sneak Peek
Hello everyone, I am super excited to share a sneak peek of our new design, Baby Peacock! Stay tuned as it will be available soon.Cheers π₯!
Key-Chain-Turtle (July Surprise Exclusive)
Update - 07-07-2023Made the joints even stronger in this update This is the maximum Downscaled Design, Do not downscale further.On Public Demand, I have added without the Keyhole versions as well :) This will remain on the Patreon page for 8 More Days.Please Grab the latest Files as soon as possible Design Archive Date 14/July/2023--------------------------------------------------------A modified version of the previous turtle to print it even sm...
Magnets-Batch-02 (June Bonus)
Hello Everyone!Posting June Bonus 2nd batch of Magnets.Magnet Size - 10x3mm- 0.16mm layer height- 3 walls with a 0.4mm- 12% Infills (Gyroid)- Use brim or raft for better print adhesion- Do not downscale (obviously)Printed on P1P, all three magnets took around 1.5 hr to print. Link to June Designs BelowDownload Link
Little Babies (June Design) (Patreon Exclusive)
Happy to introduce a new theme called "Littles"! These small designs are quick to print. It took about 1.5 hours to print one model on my K1, using a layer height of 0.14mm and 2 wall counts. I hope you will enjoy printing this design. I would love to see it printed in multi-material!AMS Optimised Design (Quick to paint with Bambu Studio Fill Tool)You can find more designs and updates on my Instagram page: https://www.instagram.com/itsart...
Final Fix of Sidewinder Snake
Dear Patreons,I sincerely apologize for any inconvenience caused by the previous issues with the sidewinder snake, specifically regarding the rattling mechanism. I am pleased to inform you that I have successfully addressed all the issues and thoroughly tested the final fix of Rattle. It now operates flawlessly, providing just the right amount of tension.I am truly grateful for all the valuable feedback you have provided throughout this process. ...
Assembling Sidewinder Tutorial
Assembling Sidewinder Rattle Snake Tutorial :P Updated the file under June DesignsRattle - Increased the wall thickness this now holds 3 wall count @ 80% Scale Head - Increased surface area now holds well with bed (I still recommend using Rafts)Download file ArtFlex_Sidewinder_Rattle_Snake_15-06-2023Royalty-free music by - sakura Hz Enjoy
Update on Sidewinder Rattle and Head
Hi everyone,I have received feedback regarding the Head component, mentioning that it is detaching from the print bed. To address this issue, I plan to increase the surface area in contact with the bed, which should resolve the problem. Additionally, I recommend using rafts as they provide increased surface area for better print adhesion.Regarding the Rattle component, feedback suggests that it is easily breaking when being fitted with the body. ...
Sidewinder Rattlesnake
Hey everyone,I'm excited to announce the release of my new STL design of a Sidewinder Rattlesnake! I enjoyed working on this design, and I hope you enjoy it too. This model is designed to be printed without supports and has snap-fit joints for the head and rattles. The jaw and body joints may require a little force to snap together. The design also has a working rattle and an openable head.Print SettingUse good bed adhesion (Rafts recommended...
Cooking Something Special
Hello Everyone,I can't hold myself to share a part of our upcoming Design with all of you, Hit this part on your print bed with 3 wall count and 12% gyroid infill, and let me know how it sounds :D Oh, Yeh! I am sharing this Piece with my Patreon Followers to test it out as well! Enjoy!
Say Cheese! Early release of Baby Giraffe(June Design)
-----------------Update-----------------1. Fixed Head wobbles by increasing the neck and head angle, Now the neck and head will be more stable.2. Fixed head overhang issue.Please grab the latest files---------------------Hi everyone,I hope you're doing well. I'm excited to share our new design, a Baby Giraffe! You'll get two versions: one with a smiling face and one with a goofy face. of-course pre-painted version as well.Here are som...
Cults3D Secret Listing
The post includes old Patreon-exclusive designs and will be updated as new designs are added. You can find the link to download them in the attached text file. After one month, the upcoming exclusive designs will be moved to a secret listing on Cults3D. Therefore, we kindly request Patreon members to download the files as soon as possible. After one month, the exclusive designs will be available for purchase from the link provided in the text fil...
June Designs
Upcoming designs for June month will be uploaded in this Post1. Baby Giraffe
Flexi Macaw (May Design) (Patreon Exclusive)
Update - 03-06-2022Added Ball joint version for more oversized Prints, Ball joint of wings are snap to fit.it is advised to use at least 3 wall count and 12 percent infills on ball joint wings.additionally, the ball joint version has an extra feather π¦-------------------------------------------Hello Everyone,Finally, here we go with our parrot, and my wife corrected me that this bird is a Macaw, which is a larger breed of parrot. π So now w...
Update on Articulated Parrot
Hello everyone,I hope you are doing great. I am providing an update on our Articulated Parrot, which has been in the testing stage for the past few days. I am happy to inform you that the model is now working great.Previously, I had tested the ball joint for separating the wings, but it did not work as expected. I have now switched back to the chain joints, and the design is functioning well.Currently, I am working on the presentation, and the fi...
Flexi Parrot Sneak peek
Hello Everyone,Introducing May's new design Flexi Parrot, I am Pretty excited about this one and This will take some time to finalize, right now I am fixing the joints and will start testing by tomorrow.I will try my best to deliver this as early as possible.I hope you are going to love it π₯°
Reminder
Hello EveryoneMarch Designs are going to be Archived soon, Please download ASAP!---------------Link --------------
Baby Gecko Articulated
Hello Everyone, I hope you are doing great,I am super excited to share our new design Flexi Baby Gecko That is a print-in-place design and does not require support. you can print the tail separately and swap between short and long tails. (If you are downscaling Please Keep in mind to remember the scale)There are two versions,1. Baby_Gecko_Smooth2. Baby_Gecko_TexturedPlease note the following guidelines when printing this design:Do not downscale t...
Baby Gecko (Sneak peek)
Hello everyone,I hope you are doing well βΊοΈOur Upcoming Design Baby Gecko is in progress.So far it is coming fine.Increasing a bit more flexibility of this design in the next iteration.This will be available to download in a couple of days ππ€πThank you for your support everyone β€οΈ πof course, I will make the long tail as well π
Flexi Baby Hippo
Hello everyone,I am happy to introduce a new design, the Flexi Baby Hippo. This is a print-in-place design that requires no support, and the head is a snap-to-fit.Please note the following guidelines when printing this design: Do not downscale the model too much (100% > 80%) Print with a minimum of 3 wall counts. It is recommended to use rafts for better bed adhesion and easy removal. Use 8-10% infill.I hope you will enjoy printing this design. H...
May Designs
Blank Post for May Designs1. Flexi Baby Hippo2. Baby Gecko3. Flexi Macaw (Fixed Pre painted version)(Added Ball joint version for bigger print)
Baby Hippo Sneak Peek
Sneak Peek of our Next design Baby HippoRight now in the testing phase on Print Bed
Magnets First Batch
Update 04-05-2023 - Fixed Dino Magnet teeth overhang issue - Download ----------------------------Hello Everyone,Here we go with the first batch of Magnets.Use super glue to stick the magnet inside the holeMagnet Hole - 11x3 mmMore magnets Coming in May Month Happy 3D PrintingDownload
Flexi Dino Skeleton April Design (Archived)
Hello everyone,I am super excited to announce that after a lot of testing, our April design, the Flexi Dino Skeleton, is now ready to be printed on your 3D printer. I would like to extend a special thank you to all of you for supporting me and testing out this design. I really appreciate your feedback, and I have tried my best to incorporate it into the final version.I hope you will enjoy printing this design. Please consider the following settin...
Curious to know
How do you found ArtFlex ?Β
Sneak Peek Flexi Dino Skeleton
Hello Everyone,Happy to introduce the new design Flexi Dino Skeleton. Right now I am in the testing phase of this design. Please let me know in the comments if anyone is interested to test this Design.Note - Keep in mind this is the first iteration of this design and print may fail.Do Not DownscaleDownload
Articulated Spider Updated (March Design)(Archived)
Hello everyone,Great news! Our spider emerged victorious in the battle of strong articulation and has regained its two lost legs, making it now an eight-legged creature. You can download the latest version of the design from the link below, Oh Yeh I included the non-mechanism design as well. Happy 3D printing!Download
Articulated Cat April Design (Archived)
Hello everyone,I am excited to announce that our Flexi cat design is now available to hit on your printer. The design includes two patterns.Of course pre-painted versions as well for both patterns πTo ensure a quality print, I recommend using a minimum of 3 wall counts and good bed adhesion by using a brim or rafts. Please set your printing speed to 60mm/sec and adjust as necessary for your printer. Additionally, please use 4 bottom layers and...
Your New Desk Companion Flexi Cat Sneak Peek
Hello everyone,I hope you are doing well. I am thrilled to share a sneak peek of our upcoming design, the Flexi Cat. This new design will be available soon as part of our April collection.Happy 3D printing!
