Post "CRJ_Sp (MSFS)" by "FTSIM" from patreon

Ungeneer

Hey, the latest update works for the CRJ in 2024 if you install the marketplace version (regardless of whether you bought it in the marketplace or not)

Eric Hill

CRJ v2 is definitely in need of this. I forgot how bad the sounds were

A320Pilot

possible update for the CRJ V2 2024?

Chaun Krause

hey guys thx for the sounds. Just wondering if the CRJ 900 could get an update to it's APU sounds, they are off compared to real life, probably the only request i've ever had about this SP Edit: I've attached some videos below showing what I mean (HEADSET WARNING Close to Exhaust) https://www.youtube.com/watch?v=BIjIY1ng9YA https://www.youtube.com/watch?v=NZiQL02otUw

Jason Paden

I have a marketplace download and I'm a little confused about the instructions. My CRJ is not installed in a community folder. It is installed through Steamapps/Common/MSFS/Official/Steam/aerosoft-crj From my understanding, I copy the original sound file into the modded sound file folders, all 4 of them so I end up having 3 files in there. Where I start to get confused is to where I actually put the CRJ_SP folder. Do I put it in the same subfolder as where the airplane is installed? Official/Steam/CRJ_SP or Official/Steam/aerosoft-crj/CRJ_SP Or do I install it to where all of my other 3rd party community files are? Common/MSFS/Community I think what is throwing most people off is the HLM_Packages as I do not have this sub folder

Davis Ebbert

I can't get the switches, buttons, or APU to make noise using 15b for Marketplace download... I have looked at what you suggested others to do as well, and yet I still can't figure it out. Would it be possible for you to redo a more comprehensive, easier to follow guide to install sounds in the CRJ if we purchased on Marketplace? I find the instructions on this plane confusing... possibly missing steps too? For example, the guide says to delete stuff in the jason file for the crj 550, but if you have the CRJ 700/900 expansion... there's a .jason file in there too with the same items that could/need to be deleted... Your other packs I haven't had trouble with, but I've now spent hours w/ uninstalls of the plane over and over after trying different variations. Why wouldn't my switch sounds, APU, and possibly GPWS not be making sounds at this point?

Davis Ebbert

Anyone else feel like they are following the steps but its not working? On the market place version, trying to get the CRJ 900 the FT sim Sounds. APU sounds, Switch sounds, etc not working :/. @FTSIM is there a way you can either make an easy install program for marketplace purchasers of the CRJ, or more linear directions for this aircraft? TIA.

Dash8Demon

I see the problem - I have no crj folder in my community folder

Dash8Demon

Nevermind, let me watch the tutorial again

K AKAIO

You did install the v1.15b ? and you're using a MarketPlace or Orbx version of the CRJ ? 👉After installation you must have those 3 files ( "Aerosoft_CRJ.PC.PCK" , "CRJ_Sp.PC.PCK" & "sound.xml" ) inside : "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000"

nick angel

After doing a fresh install and following the new install procedure, I no longer have switch sounds or GPWS callouts

K AKAIO

Nope , Please follow the instruction on the "INFO.pdf" file

Brad

Do we still need to move the CRJ to the main community folder? I see it says Easy to Install but the recommended video link (and your documentation) points to a manual install. Right now my CRJ is in this folder G:\Aerosoft One Library\Add-ons\msfs-7378-AS15236\gameDirectory~Community

K AKAIO

settings are Re-adjusted in "v1.15" , try and check if the bug still exist

Chris Torres

One thing i have noticed is that of the rain drops sound while passing thru a gloomy cloud but there is no actual rain. Hope you can check on this thanks

Chris Torres

thanks for this. hope you keep this updated. Im a supporter since x plane days..

K AKAIO

The sound works on the CRJ v1.0.18 and on the Pervious Releases - Please install the "v1.14" , ( No need to Relocate the Aircraft main folder ! , keep "aerosoft-crj" inside "Community" ) How To ? : 1/ Make sure the Aircraft at it's default install state ( nothing removed or edited ) 2/ install the "v1.14" ( just extract and Move "CRJ_SP" inside "Community"

K AKAIO

Did you tried the "v1.14b" ?

RunawayBot

Any plans for an orbx store compatible version?

John Whitehouse

I've followed installation steps, and while i can hear engine sounds and gear sounds, the following sounds don't work: Switches APU (sound is all messed up from outside view Reverse thrust - no sound No warning sounds

Bill Alicea

Great sounds. Have a suggestion on the air-conditioning sounds. Are you able to increase the volume on that and maybe a but more volume on the avionics too?

tangjuice

Think I just had my first 'freeze' with the new sounds. Anyone else had this happen?

tangjuice

Excellent sounds compared to the original. Now I want to fly the CRJs even more. I did notice some sounds aren't audible anymore. Overheat test, etc.

SockelMania

Honestly I am still not happy. The exterior are still not characteristically. Also the whining for the interior is too weak.

SRT95

I can't get the sounds to work with the v.1.14 update even when following the instructions. Note: I have the ORBX version of the Aerosoft CRJ

Liam Montgomery

I gotta agree with Luc! I've tried installing the latest update multiple times exactly as instructed and still can't get the aircraft to have any sounds of any kind.

Luc Gaupin

Can you make the v1.14b an (Easy to Install) version please...

SockelMania

After serveral months of testing and comparing to the real aircraft I have to say this soundpack got pretty well so far. Only a few more suggestions to make it perfect: Remove a bit more of the humming on idle. Seperate sounds between cockpit and cabin more (see video number three, hardly any engine noises in the cockpit). Also the whining needs to be louder / higher and more in the foreground in the cabin (also less humming here). The start up and shut down needs a complete rework from the inside and outside. Can you also try to add some engine windmilling sounds in the future? Master caution in the cabin needs to be fixed by Aerosoft, doesn't it? Some reference videos: https://www.youtube.com/watch?v=l-c8D2KRipg (engine start up outside) https://www.youtube.com/watch?v=NZiQL02otUw (APU start up) https://www.youtube.com/watch?v=MNINOa6GigQ (cockpit take off) https://youtu.be/X1eynj09oAI?t=42 (characteristic idle sound, currently missing) Let's make this soundpack perfect. :)

Parker Robinson

Great addition to the CRJ, would love some new switch sounds though.

Potta

Would like to add that it is all the original sounds, so no warnings, callouts, APU or other sounds. I have tried both update variants using MSFSLayoutGenerator.exe and build.py with Python but the issue remains.

Potta

Experiencing the same as others in this thread, I have the Marketplace version and get no sounds from the switches anymore. It worked before, and I have followed each step in the INFO document. What to do?

K AKAIO

Use the "(v1.13b)" For the Marketplace version and follow all the steps in the "INFO.pdf" file After installation you must have 3 files ( "Aerosoft_CRJ.PC.PCK" , "CRJ_Sp.PC.PCK" & "sound.xml" ) inside : "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000" Still no Sounds ? then it Must be the "Layout" file found inside "aerosoft-crj" is not updated sucssefully a) Try updating again with a diffirent Tool , "MSFSLayoutGenerator.exe" or "build.py" b) Try updating the "Layout" file Manually using the Tutorial added Below "# Notes"

K AKAIO

Did try many weather configuration but no bug found , will check it out more ....

mac

update2: confused! do I just need to follow steps 2)for the marketplace version? if yes is partA) the community folder and B)the actual install folder in the "official" folder or the other way around - note my official folder already has the "aerosoft_crj_cp_pck" in it?

mac

Update: just noticed there are a few more steps "-" "2/A + B" "3/A + B + C" - do I need to follow them all to get this working with the market place version ? and how do I get the msfslayout generator to work do I just copy the "aerosoft-crj" folder into the .exe folder and then what exactly happens?

mac

Hello! - just downloaded v1.13b and a little confused by the install .pdf - note I have the "marketplace" version - from the install instructions I have 3 steps "-" with the community folder file then "2/" and "3"/ - for the market place version do I need to follow all 3 steps? also is the aircraft folder located in the "official" folder which is next to my "community" folder? (note i have the steam version of MSFS)

dipperdolphin

Getting rain noises despite there not being any rain around

K AKAIO

Use the "v1.13b"

Marcus Key

So if I put the "aerosoft-crj" aircraft folder is inside the \\Official\Steam\ folder the CRJ no longer shows up in my sims aircraft selection.

K AKAIO

1/ Make sure the Default Aerosoft sounds are working fine ( without the sound Mod ) 2/ install the "FS_CRJ_Sp(v1.13)" => Move "CRJ_SP" inside the Community folder and do not Remove or Rename anything

Brandon M

No switches sounds for me with the msfs marketplace version. the Sound pack files instructions were followed with my crj being in the official folder. Not sure what's going on.

K AKAIO

- Did you installed the "v1.13" or the "v1.13b" ? - is the "aerosoft-crj" is inside the "Community" or the "\\official\xxxx\" folder ?

K AKAIO

not sure but i think that is the "Community" folder , Usually you will find all Asobo Aircrafts and Airports inside the "\\official\steam" 👉try to install the "v1.13b" release if you still have a Problem

Glockman40

Same here no sound on switches

buffchip

My official install directory is D:\Aerosoft One Library\Add-ons\msfsSteam-f956-AS15238\gameDirectory~Community\aerosoft-crj . Is this not the same as "\\official\steam" ?

Joao

I also have the problem of not being able to hear switches.

Alex

same for me

Marcus Key

I'm using the Aerosoft store version and I also can no longer hear buttons or switches after installing the 1.13 pack, after going back to version 1.12 I can hear them again.

Thomas Roth

I am having the same issue, also non-Aerosoft store version.

Mark Proust

Is there going to be a "non-Aerosoft Store" version? Using this version, I've tried both the new install method as well as the old install method. In both installs, I'm getting some sounds, but not getting sounds for switches, APU, etc. Followed the same process as in previous versions.

K AKAIO

The Callouts are the Default ones of Aerosoft , they Can not be edited 😕 . The only way is to Disable them and adding new ones and i think they will not be seemeless to the Default TCAS GPWS sounds 👉 Try to Reduce the Volumes of the other sounds ( Engines , Avionics , Wind )

Andra

Hi, any chance to increase the callouts volume?

K AKAIO

Yes Yes , forgot to mention that on the instruction .

Rayne Forsyth

With the beta, is it like the Twotter, where you have to move it to the "Official" packages section? Or does the actual plane stay in community?

K AKAIO

1/ After installation you must have those 3 files ( "Aerosoft_CRJ.PC.PCK" , "CRJ_Sp.PC.PCK" & "sound.xml" ) inside : "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900" "\\Community\CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000" 2/ Still no Sounds ? then it Must be the "Layout" file found inside "aerosoft-crj" is not updated successfully a) Try updating again with a different Tool , "MSFSLayoutGenerator.exe" or "build.py" b) Try updating the "Layout" file Manually using the Tutorial added Below "# Notes"

Chase Sawyer

Hey I have no sound when I loaded in.

K AKAIO

Sure 👌 , BTW that is a Loud Takeoff on the Video

Mariusz Kalinowski

Any chance to change specific for CRJ roar sound like in my YT movie at 0:24? https://www.youtube.com/watch?v=cX4AbdGhz1A

K AKAIO

Did you Make a copy of the "Aerosoft_CRJ.PC.PCK" file from : "aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_550\sound\" then Paste it inside : "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550\sound\"

Mateo Skinner

After I installed the sound pack I have been unable to hear any of the sounds that the switches make

Glockman40

I figured it out I missed understood a step. Awesome sound by the way.

K AKAIO

Did you copy the "sound" folder from "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550" and Paste it inside : CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700 & CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_900 & CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_1000 💡 Step n°2/C

Glockman40

I'm only getting mod sounds for the 550. I've been through the steps several times with no luck.

K AKAIO

Good 👍, why are you keeping the first message then 😖 . The main problems always are : 1/- "Layout.json" Not updated successfully by using any of the 2 tools provided ( it can be also updated Manually ) 2/- MSFS not restarted (if Running ) after updating the "Layout.json" file 3/ Missing "sound" folders inside CRJ700 / 900 & 1000

Micha Pommes

Its not working? Im pretty sure i installed it correctly. NEVERMIND works now! Sounds amazing! Good job!

K AKAIO

The install tutorial ( with Screenshots ) is inside "INFO.pdf" . instruction divided into 3 steps , - The first 2 are just coping files - The last Step is for updating a configuration file "Layout.json" , it can be done by using any of the 2 tools provided "build.py" or "MSFSLayoutGenerator.exe"

Edward Smolinski

is there an easy way to install these sound files? It seems a bit complicated for someone who isn't familiar with code..

K AKAIO

1/ restore the original "layout.json" file if you have a backup copy , if you don't then re-install it and create a backup 2/ Follow this tutorial : https://www.patreon.com/file?h=52857385&i=9726631

K AKAIO

1/ Create a backup copy of the Aerosoft CRJ "layout.json" file , 2/ Follow this tutorial : https://www.patreon.com/file?h=52857385&i=9726631

Kristopher Richardson

The aircraft dissapears once installed (done as per instructions) and have to reinstall in the content manager, This pack wont work succesfully for me.

Thibaud

doing what is asked to do in your instruction file and therfore the plane doesn't show in the sim

Ryan Naylor

I have the same issue.

John Doherty

is there an updated install instruction on how to install the sound if you have the market place version. I did all of the steps and no sound

K AKAIO

interior Flaps Noises are reduced on the latest update ( Was too loud ) , Now it only can be heard clearly on the Wing View

Robert

With the new update I seem to no longer be getting Flap Sounds. I'm not really sure why. We're they turned down to barely audible, or is it an issue with the sound pack?

K AKAIO

MarketPlace version ? - Try only to rename the Aerosoft sound folders and copy the ".PCK" file ( no need to update the "layout" file ) Aerosoft shop version ? - Try updating again the "layout" file using a different method ( shown on the "INFO.pdf" )

Owee-Wan Kenobi

I am not entirely sure what I did wrong, I have followed 100% but my aircraft no longer show up!

Kenneth Tjonasam

This update is absolutely magnificent

K AKAIO

Yes the values was reduced for all Sounds , is your problem only on the Startup ?

MediocreGorilla

Engine tweaks are amazing! One question: Have you tried lowering the "3D Panning" effect value for the startup sounds yet? You once said this could solve the sounds only playing on the respective L/R speaker. If you tried already, it didn't seem to help unfortunately.

K AKAIO

The cockpit Levers/switches sounds are the Default ones from Aerosoft ( currently trying to include new ones on the sound Mod ) On the latest update (v1.12) - Flaps sounds are reduced - Spool sounds ( Not Buzz-saw) are a bit louder on takeoff

Mariusz Kalinowski

Will You do some upgrade in future? I see some issues here ;) Flaps in my opinion are too loud, in real it is very quiet. Spoilers lever is heard in wingview, it shouldn't. Spool sounds should be louder, gyro is too loud. I saw You did some new version for Xplane with new sounds for it. Will You do it here too? :) Thx

K AKAIO

New update almost ready and The Gyro sounds will be removed

Dash8Demon

The gyro lines that need to be deleted are not clear at all. What exactly do we delete? The "....." could mean several things. What do we do about the spaces left over?

Chris D

Here is a video showing what I mean during the taxi and takeoff - https://youtu.be/uxinv2fhNJg

Chris D

Hey Guys, great work on the CRJ900/1000 - couple of suggestions: - Be cool if there was a "recirc fan" sound, and internal sounds from hyd pumps. - Also, the initial spool on ground from idle -taxi thrust seems too loud/sounds like takeoff buzzsaw - this should be more of a low freq drone I think? Great job though :)

K AKAIO

instruction is added above 👉 # Notes :

K AKAIO

Hi , did you follow the instruction inside "INFO.pdf" ?

Tim-Cedrik Schmitz

There is no Sound.xml in 700/900/1000. Folders are just empty

Mariusz Kalinowski

I think the gyro is still to loud and what about callouts? They are too quite. ;)

K AKAIO

The Gyro noises was reduced a bit , but You can disable it completely by removing this Parameter ( Lines n°178 ... 180 ) 👇 Sound WwiseData="true" WwiseEvent="CGyro" ..... Range LowerBound="20" /> Sound>

DJSean00

I did and I have no sounds now?

Enzo Lucignano

Thanks for the update. Quick question: if i have the 1.1 version do i have to follow the whole installation process again ?

Mark Proust

Thanks! Just a quick question about removal of the Gyro noises... I don't see the old parameter in this xml file, but I do see this new parameter: at lines 178-180 (tried to include it, but it won't let me) Should I remove this to remove the Gyro noises? Or, have the gyro noises been updated/reduced and this string should be kept? I'll keep it for now till you can confirm. Thx again :)

SockelMania

As always great work from you, thank you very much!

Liam Montgomery

Thank you so much!! These new sounds are phenomenal!!

DJSean00

Thanks!!!

DJSean00

:(

Liam Montgomery

I did some testing tonight and the current sound pack is definitely not compatible :(

Liam Montgomery

I was just about to post!

SockelMania

900/1000 expansion just released. @FTSim+ can you please check the compatibility from your side?

JWL246

Really love the immersion factor with this new sound pack. Makes the CRJ so much more realistic!

K AKAIO

will reduce the Settings value of "3D Panning" effect , i thinks it is the main issue 👉 "3D Panning" effect is a Parameter that help mix the "Left" and the "Right" sound channels , ("High Settings" Example : when you look left you will hear the "Left" sounds louder and the "Right" sounds will be muted )

MediocreGorilla

Loving this one, adds an incredible amount of value to the aircraft! One thing I've noticed: When in wingview, the startup sounds are fixed to their respective side, meaning: Looking at the left wing from the cabin while starting engine no 2 results in the startup sound playing from the right speaker, so the sound comes from the front of the cabin. Same for no 1 on the left speaker. Is that something you can refine? :)

K AKAIO

sure !

Anthony A

Really incredible package, makes the CRJ so much more enjoyable and realistic.. Only problem is there is no sound when the mains touchdown, just silent. Any plans on adding in a touchdown sound?

K AKAIO

No sound in Both CRJ 500 and 700 ? 1️⃣ After install you must find those 3 files - sound.xml - Aerosoft_CRJ.PC.PCK -CRJ_SP.PC.pck inside : "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_550\sound" and inside : "CRJ_SP\SimObjects\Airplanes\Aerosoft_CRJ_700\sound" 2️⃣ Did you rename both "sound" folders that are found inside : ...\\Aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_550 ...\\Aerosoft-crj\SimObjects\Airplanes\Aerosoft_CRJ_700 Exp : the "sound" folder is renamed to "sound.1" 3️⃣ is the Aerosoft_crj "layout.json" file is updated correctly using "build.py" or "MSFSLayoutGenerator" 💡 to check if the layout file is updated or not ! a) open the "layout.json" file with a ".txt" editor b) look for the new name of the "sound" folder ( Exp : "sound.1" ) If it is found then the "layout.json" file is updated ✅

David Horgen

I have no sound whatsoever and I followed the video exactly. password was copy pasted directly from this page with no quotes

K AKAIO

why not ! , maybe it will be made next update 👍

Lauri Salonen

Are you planning to do switch sounds for the CRJ? The aerosoft ones are terrible :D Otherwise very good soundpack!

K AKAIO

it is the Gyro noise 🧭 , Was Noted on the "INFO.txt" file for how to disable it if you want 👇 ==================== 4. NOTES ==================== 1/ To Disable the "Gyro" noises : - Open the "sound.xml" with ".txt" editor - Delete this Parameter ( Lines n°212 ... 214 ) Sound WwiseData="true" WwiseEvent="CGyro" Continuous="false" NodeName="ASCRJ_PFDC_BRT" ........... > Range LowerBound="24" /> /Sound>

Robert

I have the same problem Mark Proust has with the constant clicking noise. Here is a video clip: https://youtu.be/PAQvLNDe4nM

Philippe

I think you should do one more understadable......For beginner user the video goes to quick. Also i´ve tried to join your discord. How we do that .I´m connected through patreon and what should i do more ? Thanks.

K AKAIO

Did you watch the video tutorial ? : https://youtu.be/H5JFkWLziwE

Philippe

Yous say "drag and drop the layout.json into the MSFSLayoutGenerator.exe. How to do that ? If i run the MSFSLayoutGenerator.exe, i can´t drop the layout.json in it? I´m a bit lost at the point. Thanks in advance for the support.

Philippe

Hi everyone. I´m new here

Chirag Abichandani

In my opinion, yes such that the volume of the engines "decreases" or drowns out after crossing 250 KIAS. I recorded a video here: https://youtu.be/JOqNz3nZ1yE. You can see my TAS is above 400 yet we can still hear the "buzz" of the engines in the background. When I increase/decrease the throttle so does the buzz which is audible. It would be great if you could work on this! Reall enjoying your soundpack until now

K AKAIO

The same effect it is also enabled here on the CRJ , you can hear the difference better when Passing "Mach 0.7" or 400 Knots in True Airspeed/Ground Speed

Chirag Abichandani

Hi could you please work on removing the engine sounds as the wind sounds pick up after 10,000 or acceleration? They are still audible in cruise. This is present in most of your XP11 soundpacks

K AKAIO

1/ Can record a short Demo video showing the issue ? 2/ No Flaps deploy sound are added yet but the original are not disabled !

Mark Proust

So I downloaded the file and followed the instructions but not sure if I did something wrong so maybe you can help: 1) when the aircraft is running, the air makes almost a constant rattle-like sound. As if some paper or steamer is attached to the fan blowing in the wind… is that normal/intended? 2) I have no flap sounds… the just extend/retract silently. Let me know what you think when you get a chance. Thanks!

K AKAIO

of course 😊 , will add other Cabin ground Roll samples

Liam Montgomery

I absolutely LOVE these new sounds! The aircraft feels so much more real. Would it be possible to increase the ground roll sounds a bit? Every CRJ I've ever ridden in sounds like a box of loose bolts lol. That's my only real suggestion!

K AKAIO

- Maybe wrong Password ? or "Space" added ? : "MFSiM-Sounds" ( Copy & Paste without quotes ) - Try Using a diffirent Archiver Program like "Bandizip" or "7zip"

Dennis Mullert

It appears that the CRJ sounds downloads are corrupted. Can you guys look into this? No issues with the other downloads.

K AKAIO

Didn't add any Hydraulic sounds yet for the CRJ , soon will do

Bryce

Can you make the hydralic sound louder in the cabin? https://www.youtube.com/watch?v=oaCjrI3ejZU&t=106s

K AKAIO

A New install format will be added soon and it will work fine with both "marketplace" and "Aerosoft Store" versions .

K AKAIO

this sound mod require the default Aerosoft sounds to work , just restore the "Aerosoft_CRJ.PC.PCK" file then it will be fixed

Chirag Abichandani

Hi, I put in the sounds and used the layout generator. I deleted the Aerosoft sounds and put in yours in the aircraft folder along with the xml. Even though the plane shows up in sim when loading it up there are no sounds in sim. I have cross checked that the entries for CRJ_SP_PC.pck are in layout.json, and they are. Any solutions? Update: Restarted my computer and sounds are working, but inly engines/gyros. No switch/knob/warning sounds. Is this right? If these are not included in the sound pack, are we supposed to keep in the original AEROSOFT_CRJ.PC.pck in the sound folders?

K AKAIO

i notice that on the Carenado , though this "Encryption" stuff is added only for the Asobo Legacy aircrafts . But if you tried the files above and still not working then will have to rework the sounds it to be like the B787 version ( Stand Alone )

Seth

Thanks for your support. Here is a quote regarding this issue from Aerosoft/CRJ forum: "Ok let me help. When you buy ANYTHING from the market place, they add a DRM layer on top of the standard files. This is downloaded to your computer in an encrypted format. When you call the add on into the sim (like choosing to fly the CRJ) the files are decrypted by the sim and things run. When you buy direct from the publisher/developer, you will get the files in the manner in which they intend you to get them. In the case of AS, you get the unencrypted files. If someone makes a mod (authorized or not) and you install it, you are doing so at your own risk and responsibility to trouble shoot. This can include liveries too as many that can be found will cause problems with add on planes. This sound mod being spoke of, was it shown to work with the update that Asobo just pushed out? That is one thought. For anything deeper you must go to the source, either Asobo for market place purchases or whoever made the sound files. "

K AKAIO

Sorry for delay , Can mention the names of the ".fsarchive" files ? ( found inside : \aerosoft-crj\SimObjects ) menwhile try this : - Make a bakup of the Aircraft folder ( make a copy or add to zip file ) - remove the ".fsarchive" file that have the smallest size - extract and paste those files https://drive.google.com/file/d/1ncoDD9GLH5QqvMJNjdNPrBdiyHTzUeYs/view?usp=sharing - update the layout file again with the ".exe" tool >> if the aircraft not showing try to remove the next smallest ".fsarchive" file & update again !! Still nothing then will buy again the Package from the marketplace

Seth

Just checked Aerosoft forum: https://forum.aerosoft.com/index.php?/topic/161943-add-soundxml-file-in-the-msfs-store-version/&tab=comments#comment-1030981

Seth

So you bought 2 times CRJ? this is ultra weird issue as Aerosoft sent the same files to Market place.

Bryce

Figured it out. The MSFS marketplace files have something wrong or missing. I purchased from Aerosoft, and there was an extra file in the sound folders. Installed per instructions above and voila. Never buying another aircraft addon within MSFS...

Seth

This is updated layout.json file. Is it normal to have Aerosoft default sound + Ftsim sound entries? { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/Aerosoft_CRJ.PC.PCK", "size": 59296300, "date": 132674513919150775 }, { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/CRJ_SP.PC.pck", "size": 154871626, "date": 132689554064949649 }, { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/desktop.ini", "size": 46, "date": 132674513872413887 }, { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/sound.xml", "size": 41553, "date": 132689556180756820

Bryce

Do you have an older version of the CRJ?

Thibault

It worked for me just fine.

Bryce

Not working for me either, same issue.

K AKAIO

Aircraft not showing = something wrong on the "layout.json" file or it is missing - did you use the "MSFSLayoutGenerator.exe" ? if the issue still exist ! 1/ restore the Default "layout.json" from your backup copy 2/ open the "layout.json" with a ".txt" editor and Paste this entry below "content": [ { "path": "SimObjects/Airplanes/Aerosoft_CRJ_550/sound/CRJ_SP.PC.pck", "size": 113187139, "date": 132684342887981342 },

Seth

After CRJ sound Mod installation, aircraft is not visible on MSFS. Do i have to place sound files in both aircraft editions ( 550 & 700) ? -Update: Placed sound files in both editions and still its not working. Thanks