FTSIM patreon

A320IAE_Sp (MSFS)

🕑 Added 2025-06-29 00:01:00 +0000 UTC

Comments

Dino Rossetti

Are these worth it for the bfu update?

drippy Arthur M.

no horizon sim a321?

Scott Johnson

The Fenix Block 2 Audio is amazing, but it's also somehow killed all blur/heat and contrail effects from the aircraft?

esm920

Same here

LeonP

I have no Engine sound after installing this on Block 2

Dustin Scott

Awesome! Is there any way you can update the Headwind A330 packs for the current version? Those were awesome!

James Bird-Parkes

Is this compatible with Fenix Block 2?

K AKAIO

Usually this Pack is installed by Default in LVFR 319/320/321 , So just with replacing the old files it will do the update

Superedil Aviation

this pack sound for LVFR A320 no change continue default sound I passed the folder to simobject of the a320 ceo and nothing no sound

Ryan Vanvickle

Great Sounds, keep up the awesome work. I would like to see if you can incorporate a little bit louder engine startup sounds in the cockpit like the FBW A320 with the next release. Thanks much!

Tarek Gigs

For the fenix I am not the sound cockpit and cabin

Ash Rushil

Hi.Do you mind updating this for the LVFR A320ceo?

Nez Nok

For LVFR A320 please

MADDOX Piloto

Hi, Do you mind for updating for the FBW A320Neo pack? I used it for LVFR A319 with Horizonsims Mod, since the V1.0.1 for LVFR A319 a bit uncomfortable to my ears. Thanks

Chris Watkins

The MP 321N seems to have the same issue. File structure is different than instructions and it conflicts with each other.

Chris Watkins

I have this same issue with the 319. Tried several times and it just removes the entire aircraft from the sim.

Carlos I Maisonet

LVFR A319 doesn't work for the market place version, the sim uninstall the aircraft every time the Sp is added.

K AKAIO

added ✅

Alvin Yee

Is this compatible with LatinVFR A321Neo?

K AKAIO

Video Tutorial : https://youtu.be/tkorvfQBE74

Malte Dietsch

I hear the default Fenix sounds. And I followed your manual 100%. Neither the IAE nor the CFM are working for Fenix.

K AKAIO

IAE version for ProSim will be made ....

Acebk

Good day how do I install for Prosim? Thanks

K AKAIO

already available by Default

K AKAIO

You must update the Aircraft configuration file "layout.json" ( installation step n°2/ ) You can update it Manually or by using the "build.py" (much easier )

Malte Dietsch

Installed it today, but both the CFM and the IAE don't work at all for the Fenix. I just hear nothing. What can I do?

Raphael Vargens

Hello! Any plans to make CFM sounds available for LVFR A319??

K AKAIO

- They are the same , just released by LVFR very Late . - Yes "Roar" sounds can be changed , just Provide an example ( like a video ) then will seek for the closest sound Sample available to replace it

Mariusz Kalinowski

What is the difference between default LVFR a319 and from here? Aren't they using Your soundset? Is it possible to change specific IAE roar sounds on this soundset? They are lower IRL than yours.

Kelvin Keeble

will you be making sounds for the LVFR A319?

K AKAIO

LVFR Devs should have included the new sounds already like the A321 or maybe is not fully released yet 🤨 ?

Andrew Niiranen

I second this, I have been trying to figure out how to get these sounds to work with the compatibility mod for the latinvfr A319. Nothing I can do fixes it.

Nez Nok

Could you re-configure this V2500 pack for FBW A32X? The following mod only works with "A32NX compatible sounds". https://jp.flightsim.to/file/41546/lvfr-a319-fbw-a32nx-compatibility-mod-experiment

Mariusz Kalinowski

Have You got plans to do for LVFR A319?

Q1013

Hi, *this comment relates to the Fenix A320 only* I've decided to write some suggestions here as well: These engine humming here is actually more accurate to the CFM engine humming in my opinion. As with the CFM version, please add, ground roll, flaps, button, lever, and gear extension / retraction sounds. Now to the issues and suggestions: The main issue is the absence of the engine roar / buzzaw. Another problem is that it's is completely missing from the rear cabin and over the wings. Note that the humming volume is not an issue in the cabin so no need for improvements there. I'd also recommend improving the startup sounds. An important suggestion is adding hydraulic sounds. The sound is at roughly 900hz and can be heard here at 0:24: "https://www.youtube.com/watch?v=6_xuxGli4GA&t=4s" or for the pure sound here "https://www.youtube.com/shorts/HfME1AyCqag". I've also noticed the sound pitch lowers when extending / retracting flaps. In conclusion, I think this soundpack should be the CFM one. It lacks a lot of sounds but has great potential. Can't wait for the full version of this. :)

K AKAIO

installation tutorial (screenshots) on the "INFO" file isn't updated because it still the same instruction

Aconite

The info.pdf shows sound pck name is A320_IAE_SM.PC.pck and size is 133944416. But I just only found A320_Sp_PC.pck with 120104863 bytes in the zip file. I guess you made zip file with wrong pck file. Check again please.

K AKAIO

This mod will change only the sounds , nothing else . 👉 After the installation : 1) - "A320_Sp.PC.pck" file is added inside : \\SimObjects\AirPlanes\FNX320\sound\ 2) - "sound.xml" file is Replaced inside : \\SimObjects\AirPlanes\FNX320\sound\ 3) - 5 lines are added inside the aircraft's "Layout.json" file { "path": "SimObjects/Airplanes/FNX320/Sound/A320_IAE_SM.PC.pck", "size": 133944416, "date": 133047972748667004 } ⛔ If the lines are wrongly added !! the Aircraft wont show up on the MSFS Menu

K AKAIO

v1.01 has the most accurate configuration yet regarding the Position of the sounds , - Many settings are tried , some are buggy and the other not that great

K AKAIO

Please watch those installation tutorial ( all similar Process ) B737 : https://youtu.be/vem7FvAjSkM MD80 : https://youtu.be/CKUgAkMom4g Emb110 : https://youtu.be/V6VC9y2Zqg4

Marcus Key

Sounds are working but I no longer have heat exhaust or contrails behind the plane at altitude after installing

Robbie Wilson

The folders are very specific - and all you have to do is install Python - then you can just double click the build file that goes into the main folder of the aircraft. Make sure you arent putting it into one of the livery folders... , the rest are in sub folders per the directions.

Ellery Queen

I must be doing something wrong with msfs a/c. I break every aircraft I try to do these to. I don’t know if I’m not putting it in the correct folder or what. And I can’t get the python thing to work right either. I am very tech savvy dumb with this apparently. I attempted the Fenix and headwind A330 and broke both aircraft.

Robbie Wilson

@FTsim - Im sure you are well aware, but this plane is a bit more complex as far as the soundscape goes. They have different levels for everything including the power unit on the ground, engines, that change every step as you make your way around the plane... Ive noticed that you can hear the engine if you sit in front of it, but it goes away completely if on the wing or behind it. Im wondering if some of the native soundscape settings are making it difficult to make work. Just wanted to make sure you were aware of this

Evan

This sound pack needs a ton of fixing. The engine startup isn't very good, in the cockpit you can hear the hum sound, which is only heard from like the wing and back of the cabin. You should hear a different sound up front with a buzz on takeoff. Please improve this sound pack as it's quite inaccurate to what the IAE engines are supposed to sound like.

Evan

@Marc there is a soundpack for the CFM version by FTSim

Marc

Some more feedback: There is no electrical "hum" or 400hz sound when only batteries is on, it's missing.

Marc

Are you making a soundpack like this but for the CFM version?

K AKAIO

Feedback Noted 👌, this will help fixing few things

K AKAIO

👍

esm920

I can barely hear the engines in the cabin with the fenix once you apply take off thrust. During taxi you can hear them fine.

Marc

Ok so some feedback, I'm using this with the Fenix A320; overall the sounds are great but I noticed especially the cockpit sounds such as the avionics and packs are quiet so can you please raise the sound volume of these by 5 to 10 db? Same thing for exterior sounds the APU and the air conditioning packs should be louder so it can be heard from the cockpit more. Also the engine buzzsaw sound is still audible during cruise, it should be nearly drowned out by the wind sounds. Other than that a great pack! I hope you will make one for the CFM version!