FTSIM patreon

A320Neo_Sp (MSFS)

🕑 Added 2020-09-11 18:01:17 +0000 UTC

Comments

Dustin Scott

Nice! Please update for Horizon mod A321!

Blook

Can we get an update for this with the more modern install method?

Eli

will there be an update or fix to the horizon mod? its is not working

Frankstar

Hey, your Mod for the Horizon LVFR isnt working anymore. Do you plan an Update?

EDDF_Chris1

when I move the sound folder "Enable Cockpit Sound" to the FBW, the cockpit sounds are missing. Where should the folder go? Nothing found in the instructions:(

No Rulz

how come the volume is low?

Ash Rushil

Inibuilds A320neo please

Youngy

Any update planned for this? Would be ideal for the Horizon LVFR NEO...

Rahul Kumar

The PW whale sounds while increasing thrust is still underwhelming. Can you make it similar to the KOSP sound pack seen here for Toliss? https://www.youtube.com/watch?v=DHrcCVSiop8 See 37:10. Thanks so much for your work! :-)

ADP9295

Do you think you can make compatible with the default LVFR A321neo?

jamesy1324 .

does this work with the inibuilds a320

Christian Behne

Please update ProSim sound!

HenryM

Could you please update Prosim sound too?

Christian Behne

Same here. I only hear the default sounds. Can you please update it?

JJ Stevens

Any chance to get this sound from the PW? https://youtu.be/pmSMqy8HRDA?si=_U-Qw0VXe_HtjmFg&t=177

HenryM

New Prosim flight model broke this add-on! Even if I follow to the letter your instructions I am unable to get your A320 Neo sound to work. Instead since the latest Prosim Neo v1.01 came out I am only hearing Prosim défaut sounds

Zavier Cordova

Bump.. Need this

Majortom

Hi! Love the sounds! Can you update for the Horizon simulation lvfr a321neo mod and all the other Horizon sim airbuses please? Not getting gpws callouts. Love to make a video of this

Mariano Flores

Also I would like to add that I love your PW sounds for the ff320 so if you can make them as close as possible to that then it'd be much appreciated :)

Mariano Flores

A little request but can you make the "whale" sound a little bit louder on the lvfr SP? :D

Ethan Pothering

How do I install this with the LVFR A321NEO V2.03? There are two different sound .PC.PCK files now

Brad

Any chance of updating this for the latest LVFR mod? I noticed there are now 4 files. FBW_A320_NEO_1.PC.PCK FBW_A320_NEO_2.PC.PCK module.json sound.xml

Flyingforlife

Could you upload a updated version for FBW v0.10.0? Thank you very much!

Rahul Kumar

Hey dude! It looks like the mod ends up working on the LEAP engine and not the PW engine for the z_LVFR mod. Are the paths for the SimObjects correct?

K AKAIO

fixed

yongeee_

RA callout is missing (zLVFR MOD)

Mario Lopez

Great Work

HenryM

Yes and actually quieter than the CFM

K AKAIO

FBW ?

K AKAIO

yeah , there is a mistake

HenryM

Instructions delivered with Prosim are for the 737. Not clear what to do.

Jam Anchores

Would it be possible to add GPWS and altitude call-outs? I've noticed that these sounds are missing after installing the sound pack. The "50,40,30,20, retard" callouts will sure bring more realism and immersion. Hope you could look into this, thank you!

K AKAIO

configuration for zLVFR is added

Brad

Has anyone managed to get this working with the LatinVFR A321 PW with the FBW integration?

Chris Kabigting

Hello! Is it possible to have an updated cfg file for the latest FBW stable release (0.9.1)? Thanks so much!

Ertugrul Altun

Would love to have that so much for the A321 Neo!!

K AKAIO

Request added , soon will be ready if possible

SockelMania

Any chance to get the soundpack for this mod? https://flightsim.to/file/36395/lvfr-a321neo-fbw-compatibility-mod

BurakETC

not working...

Porcelain Kilt

"stable" is V 0.8.2 as of today June 30, 2022 and the SP doesn't work. It screws up the aircraft operation.

K AKAIO

On The A320NX v0.7.4 ? , Break How ? 1/ Try to Re-update the "Layout.json" file using the "build.py" script ( Noted on the "INFO.pdf" ) 2/ Manually Editing the "Layout.json" a) Restore the Default FBW "Layout.json" file from your backup b) Open the "Layout.json" file with NotePad c) Paste this Parameter (shown below) after any " }, " { "path": "SimObjects/AirPlanes/FlyByWire_A320_NEO/sound/A320_NEO_Sp.PC.pck", "size": 72758542, "date": 132843220719923537 }, like this : { "path": "SimObjects/AirPlanes/FlyByWire_A320_NEO/runway.FLT", "size": 8397, "date": 132860780620707800 }, { "path": "SimObjects/AirPlanes/FlyByWire_A320_NEO/sound/A320_NEO_Sp.PC.pck", "size": 72758542, "date": 132843220719923537 },

Ellery Queen

I am currently using the stable version fbw and it seems to break the aircraft for me :-(.

K AKAIO

uploading the A32NX updated version soon

Seth

Hi and wish all the best for 2022. Is latest update v1.82 (18/Dec/2021) for A3NX also ? or is just for default Asobo edition. thanks

K AKAIO

Noted 👍

Lev Game's Channel

How can I do interior engine sounds louder? It's too quiet in the cockpit in comparison with standard FBW engine sounds.

Wally Medrano

hi as for the leap version the same thing for this one. The stable and develop versions only have to pck files and they are different to the ones on the video and on the info.text. can you update instructions for this thank you in advance.

K AKAIO

The Problem is on the A32NX (Developper/experimental) >> it will crash or become "buggy" when you update the "layout.json" file to enable the new sounds

Mariusz Kalinowski

Is it possiblem to make it for A32NX experimental?

Максим

The developer write in the description what it works only on the Stable version!

K AKAIO

Stable release ? , Please do not use the Dev Versions

Alex1985

As soon as I have installed this mod my sim does not show up the fbw A320 anymore. It is causes by this generator changing the file... I have followed every step in the video. Now I can't load the FBW A320 anymore

Mariusz Kalinowski

Yes, new dev version

Mariusz Kalinowski

And I don't have ATC sound right now :D

Mariusz Kalinowski

I used it in A32nx dev version, but there are some bugs. No AP disangage sound, no flaps lever changing sound (interior), no airbrake lever sound. I tried to change it myself in config file, but it doesn't work right now. Earlier was working good.

K AKAIO

will Re-upload it in a simpler install format for the Default A320 , for now restore the default "sound.xml"

Jordan Ruiz

Hi there! I have followed the install instruction thoroughly to set the sound up on the Default A320 - No luck there's no sound... Made sure to read the thread and tried your troubleshoot several times any idea what could be wrong?

K AKAIO

v1.78 is just the new configuration added for v0.51

Christopher Grof

Hi, where can I download v1.78? All I see is 1.77? Thanks a lot! Best regards!

K AKAIO

The Files are renamed randomly when extracted so the numbers will not match the original file name , but and i know what sound you referring to , > what do you need exactly ? 1/ the Avionics sound file (.wav) ? or 2/ disable that sound

Ben Lim

Hi there - thanks for the sound pack; I am trying to incorporate it into my flightdeck setup - when external power or APU is applied there are several sounds that are played - I am unable to find the sound which is triggered prior to the airconditioning, it sounds like a swirl and is played at 31 seconds in your video - https://youtu.be/qwyywlFh7Io?t=31 ; I have extracted the sound files and the files associated with this startup is 16, 57, 58, and 72 ; do you know which sound number is played prior to the airconditioning (no 72)? Thank you

K AKAIO

Great , i'm making a few fixes soon anyway

Seth

1.73 works great with latest MFS update

K AKAIO

the Problem is the "build.py" file , you did not "Run" it or is placed into the wrong directory

CH

HI, your A32NX v1.83 with Pre-installed Doesnt WORK with the LAST UDAPTE MSFS 2020 29/09/2020

CH

FTSIM , Hello, the A32NX PRE-INSTALLED WORKS 100% , but i had the last A32NX this version is the last and the cockipt have other LIGHTS , this A32NX when i change sound the A320NX APPEARS DARKS SCREENS, I give u my LAST A32NX and u TRY put the Sound pack and send me again works , please. Thanks good job. https://mega.nz/file/gA0zmajA#tl31clHtclzfU1DEL1EuE7y0S6OklSpU27wa3cemsW8

K AKAIO

did you run the "build.py" , usually it's the main issue

CH

link to my image , MY A32NX last version, with ur SOUND pack https://i.ibb.co/QMKf7b1/cold.jpg

CH

It's impossible, I can't install this, I've tried everything. With my last version A320NX the sound works,! but the buttons do not work and the screens are black. I have tried everything. I have done everything correctly. If you have a working A320NX, send me the link With the default A320, copying the sound makes the plane disappear from the game menu

Fredo Gaming

I have this, but all sounds works perfect...i have NX mod and did what it says in the notes how to install....simple, just backup the sound.xml or rename, and the copy the *.pck file from S-pack folder to A320NX/sound folder. And then move or copy the "build.py" to the root of the A320 directory (not sounds) and then run it to update the "layout.json" file.

K AKAIO

use the "New Configuration for A32NX" added above

K AKAIO

installing on the Original A320 ? - Did you run the "build.py" after installing the sounds ? >> The build.py file must be placed inside "asobo-aircraft-a320-neo" folder that contains the files "de-DE.locPak" , "en-US.locPak" ...

K AKAIO

soon will be made as the IAE & CFM

CholoSimeone

seatbelts announcement sound is broken i think

CH

It is impossible for me to install this sound, I have the A320 by default, I am doing everything in the video, I have also installed the phyton program, and when I open the MSFS2020 the sound does not work

Asher Pramono

Any chance in having the LEAP-1A sound converted for use with FS2020 since the A320neo in the sim actually uses the CFM LEAP engines?

K AKAIO

Use this : https://www.patreon.com/file?h=41498987&i=6396691

Pa Bas

OK great, but same with fire alert sounds. APU and engine fire test. They have implemented it :)

K AKAIO

already done that from the v1.71 and the belt sounds are working fine

Pa Bas

The A32NX has seatbells chimes implemented. If you dont add these kind of sounds by yourself, you could edit the sound.xml that the chime sounds from A32NX can stay

K AKAIO

Belt sounds ? Sure but PA and other effects !! i have to gather more data first to know if possible .

David Norfolk

Hello! Loving the sounds, any plans to add seatbelt chimes, maybe some passenger annoucements etc?

K AKAIO

How to install : https://youtu.be/ioZiXraqji0

K AKAIO

Also i Noticed that the sound "Fade-out" on the interior view is not working ,

K AKAIO

install tutorial is added here ; https://mfsim-sounds.blogspot.com/2020/09/a320neosp-fs2020.html

Kevin

Hey. I've done all steps including running buildpy. I have 3 soundpacks and it still doesn't work. I appreciate if you help me thanks

Praanot Kokkate

same

K AKAIO

Correct ! you must get 3 .pck files then copy the "sound.xml" from ..\\S-Pack\A32NX Mod\

K AKAIO

Sure , More sound effects will be added soon

Seth

In my situation everything is working except the engine sounds. How many soundpack should be inside A32NX /sound folder ? i have the default Asobo_A320_NEO.PC.PCK , Asobo_A320_NEO_Improved.PC.PCK, and Asobo_A320_NEO_Sp.PC.pck ( FTSim) with sound.xml ( FTSim) , is that correct? I also executed build etc

K AKAIO

i'll reduce the Engines noise Fading "on Cruise" , also i think the next best solution to control the wind sounds is to set it on the "User Interface" slider (Who Controls the FS Menu sound)

Copy Santex

more ground sounds and louder. the rest are amazing good work!

CholoSimeone

Got it working! Thanks! It would be amazing if we could have some rolling, gear sounds, etc

Seth

Making a route now with 1.71. On cruise mode engine sounds are almost silent, there is only a wind sound interiror/exterior. Is this normal ? Also when ATC is speaking has a conflict with wind ( which are on the same volume/level)

K AKAIO

1/ For the A32NX use the Available "build.py" file . 2/ If you installed before the new sounds on the Default A320 "asobo-aircraft-a320-neo" : a) - delete any new file added b) - restore the default sounds ( if you don't have a backup you can leave the "sound" folder empty , the originals are already inside A32NX ) c) - Run "build.py" file found inside "asobo-aircraft-a320-neo" ( you can copy & use the file from the S-Pack if you dont have one )

CholoSimeone

I think build.py aint executing properly

CholoSimeone

Not working for me. Already followed instructions

bravo77whiskey

Hello. I have an issue. Since the first version build.py never updates my layout.json and I end up with no engine sounds. I have repeated multiple times following the instructions very carefully but it never works. I have tried both with the A32NX and without it. Neither of them work. Could you know why my layout.json doesn't get updated by build.py?

K AKAIO

will reduce it or assign it to another volume slider ( "Other Aircraft" or "User Interface" )

Chris Nix

The A32NX one, check the readme in the zip file.

Chris Nix

I use the headphone simulation setting, so when in the cockpit, you have a simulated noise cancellation. With your sound pack, though, the wind is way too loud. Is it fixable by you? I don't want to reduce the whole environment sounds just for that.

Seth

reading 1.7 installing notes, which build,py needs to be executed on A32NX ? default or the new one from S-Pack, thanks

K AKAIO

🤔

K AKAIO

try the new version , the View angles are adjusted more ( on Wwise ) but i can't confirm on FS2020 because there isn't many custom interior Cabin camera views ( only 2 Wing view )