FTSIM patreon

A320LEAP_Sp (X-Plane)

🕑 Added 2020-05-15 06:23:18 +0000 UTC

Comments

Matt Amat

hello , the password not recognize? helpme ?

EFRAIN RODRIGUEZ

im getting a GUI error in xplane 12, followed the instructions

Cameron Smith

different file for toliss

CornAddict

Can you only install one engine sound set at a time with Toliss?

K AKAIO

if you did install the v1.72 for XPL11 then install only the "data" and "fmod" folders from v1.73

Felipe Gatica

hi! fuctional version 1.73 in xp11?

Jakob Ek Jensen

Any chance to get the LEAP engines for ToLiss A320neo? :D

K AKAIO

FFactor sound set is updated

Sérgio Lamares

Everytime I load the FF A320 XP12 with v1.72 I get this warning: One or more issues were found with this sound bank. Please check the Log.txt for more details. Aircraft/FlightFactor/Airbus-A320-Ultimate-12-extended/fmod/A320.snd sim/weather/thunderstorm_percent event:/Weather/ThunderFX (soun_fmod_container.cpp:215)

K AKAIO

X-Plane volumes ? , if they are all High ! then try to reload the "FFA320Connector" configuration ( see "INFO.pdf" )

Mariusz J

FF A320 - sounds are too silent even with max volume. How to fix it?

K AKAIO

👉Completely Delete any old "fmod" folder from the aircraft directory then re-install a new one from the "S-Pack"

Amir kane

How do i download For JAR design A320 i keep getting an error saying ive damdged the default sounds with the FMOD

K AKAIO

No "Custom Avionics" in a the latest A320 ? , not a big issue though it is only added to disable the Default Jardesign Gpws

ukflyer

hi, JARdesign install doesn't include a Custom Avionics folder, is this ok? Install notes say to back up the folder... thanks

K AKAIO

Yes of course , just select "PW" engines on the FMC

ukflyer

can i use the LEAP sounds on the JARdesign PW engines?

K AKAIO

JarDesign (CFM/LEAP) ? How To Install : 1/ Open "S-Pack" and move "Custom Avionics" , "fmod" , "plugins" and "sounds" inside the "320_JARDesign" Main folder 2/ Delete the "sound3d" from "\\320_JARDesign\plugins"

William Tocher

Followed the instructions as per doc and I get the neo sounds with the CFM sounds as well for some reason. Any ideas?

K AKAIO

Never fully tried it 😕

Wally Medrano

Do you recommend not using bbs on the leap model? Or should i still install bss? I know there is instructions for this just not sure i need it considering how good your packs are.

K AKAIO

FFactor ? , Use the "BSS-15" folder ( instruction inside the "INFO.txt )

Govind SRaj

I have the BSS pack installed ...so how can i install this with BSS pack? any suggestions?

K AKAIO

always making updates after getting the "Feedback" , but first did you check the x-Plane volumes ?

A320airbus

Using FF with BSS combo, the engines seem a bit quiet and the startup doesn't seem as powerful as what i've experience in real life and looked at o Youtube, any more updates coming ?

K AKAIO

Of course 🙂

Rabso

Hi, do I need to use "Enable PA" to hear PA sounds? FF A320 here

K AKAIO

For Toliss A321 : https://www.patreon.com/file?h=45375100&i=7806531

Eduardo

Hello, do you guys consider change the “altitude callout voice“ for the toliss? The default altitude callout voice of the toliss Isn´t the most common, I´d like to have the same callout voice as the flight factor a320, for example, but in the toliss

K AKAIO

- Check if the "xLua" folder is inside "\FFactorA320\plugins" - Check the "VHF-2" & "PA" Volumes knobs ( Press down & turn clockwise ) > Will test it again here on the meanwhile

Shrinivasa Prabhu

@FTSim+ i just checked the PA speeches in the sound folder, they are just 30 - 37 seconds of static for me. No voice.

Shrinivasa Prabhu

Hello, I followed you up last time on ATC/ PA sounds on the FFA320. I downloaded your latest pack today, but I am unable to hear any ATC chatter/ PA sounds even after following all the instructions in your PDF. Awaiting your reply. Would be grateful if you could help. Regards

K AKAIO

You Did not answer to my comment 🙂! . What is the sound you want it to change ? 1/ Fuel ignition Phase ( Combustion start ) or 2/Turbine starter sounds (N2)

Ólavur Brekku

When can we expect that update? Sounds awesome 😊

K AKAIO

Fuel ignition Phase or the starter sounds (N2)

Ólavur Brekku

is there any plan to update the startup sound?

Shrinivasa Prabhu

I am using FFA320

Shrinivasa Prabhu

Hey, My cabin PA is not working, no copilot sounds audible although all the sliders are set at max. Any help would be appreciated thank you

Maxence Coupin

Ok great and it was in the leap btw

K AKAIO

i get another comment reported the same thing ! (not sure PW or LEAP) but check if the X-Plane Volumes are 100% ?. if yes !! , then i'm already making a small update soon and will tweak the noises a bit more

Maxence Coupin

Hi, sounds for the toliss 319neo are a little low is it normal?

K AKAIO

sounds for the A321 on the new TolissA321 Post

Catch Up

Hi, the A321 soundpack link is broken!

K AKAIO

soon updating this Set also to match the FS2020 version

SMILE CANDY

I really like this sound. However, I wish the engine sound from the cockpit was more louder. Always thank you for your hard work!! :D

K AKAIO

1/ "BSS-15" folder is to mute the BSS sounds 2/ Fmod Engine sounds works only with "FFA320Connector" found inside "plugins" >> Make sure to copy the "plugins" from the "S-Pack" to the FFA320 folder

Ólavur Brekku

i use BSS 2.5 for ffa320 and if i only copy the folder from BSS15 there are no engine sounds either the instructien not clear enough or is it not compatible?

K AKAIO

yes the old version is removed "v1.21" but the new version still online "v1.3"

djanders12

So... When I press A321 toliss download the page wont come up and wont start to download as it says. The file you are trying to download is no longer available. This could be due to the following reasons: The file has been removed because of a ToS/AUP violation. Invalid URL - the link you are trying to access does not exist The file has been deleted by the user.

K AKAIO

yes yes , i forgot to add the new "xLua" script inside the Pack 1/ Remove the older "xLua" if found inside "plugins" 2/ extract and place this new one

Kuramathi

is this Fix (!! Use this ATC & PA Fix ( Missing xLua script )) for TolissA321?

K AKAIO

Check the volumes on the Radio console : "Press down" then "turn clockwise" the VHF2 Knob for the "ATC" and the "PA" Knob for the "PA" (chek more the A320_Sp.Pdf)

Francisco Salazar

I don't have PA nor ATC in FFA320, did a new install, followed every trigger in the PDF but no ATC nor PA sound.

Kendell Robinson

Great job on the engine sound fix and noise over the wing. Thank you

Cord L

Interior sounds works now, great improvement.Thanks

K AKAIO

Fixed , Link updated

Kendell Robinson

Thanks Boss.

K AKAIO

fixing

K AKAIO

i found the issue ! , its one wrong number

Cord L

With version FF320 Leap 1.5 the sounds interior at the wings sound like exterior

Kendell Robinson

V1. 3 FF download I noticed that it's extremely loud sitting over the wing and any seats behind it. Can you change the repetitive sound of this engine. Make it one tone, sounds like someone's wet finger going around the lip of a wine glass.

K AKAIO

On Toliss ? yes its a bit delayed , it's not caused by fmod but the DataRef used in Toliss

Fernando Carmel

The auto pilot sound disconect is a little bit in slowing. Its is normal?

K AKAIO

How ? Maybe wrong install or low volumes ? - Move "fmod", "Plugins" & "sounds" inside the TolissA319 main folder - move the x-Plane volume sliders to 100% , Radio & Copilot & user interface - open Toliss ISCS and move "Environmental" volume slide to 100% and save !!

owen james

sound not working on 319

Elliot Reeves

Hey, I've noticed a few things. I'm not sure if it's an issue with this mod or something I did wrong, but I no longed get 3 clicks when engaging thrust (climb, flex then toga). Instead, I only get 2 clicks that don't match the detents. Also, my mimimums callout didn't sound at all, is another thing I noticed since installing this.

K AKAIO

yes , i think i did not focus too much on the engine Start up last time , but will do on the next

Edward Brewer

Hey man, I love your work to bits and am very happily a paying member of your Patreon. I just listening to the start-up sounds on the FF A320 with BSS variant and the start-up sounds are not quite right. Having worked around these aircraft, the start-up sounds something more like this: https://www.youtube.com/watch?v=Ulq4-SfOIlk

K AKAIO

Yes Delete if you have already a Full backup copy of the Aircraft . also you can use it with any FFA320 model , "moded" or not

Francisco Salazar

Should I delete (after backup) the "sound" folder from the default FF320? Or just leave it there and put the "sounds" folder that comes in the zip into the aircraft folder? Thanks for your amazing work! And also, can I use these sounds with the default 320 engines? If I don't install any NEO engine mod, will it still work?

K AKAIO

1/ Start up will be adjusted 2/ Maybe the Ext shutown sounds are not working ,soon will look into with the APU & Flaps but don't focus too much on the older PA 🥴, it will be replaced 3/ Combo BSS ? how ? do you Need only the Engines sounds ? >> just delete all the Parameters you don't want on the ".snd" file and restore the default sounds

CardaJowol

Few issues with this pack, internal engine start sounds on the 320/319 seem low on initial start up. 319 exterior sound seems to fade out when shutting down the engines? rather weird. 319 PA announcement also started before I even turned the plane on too. Flap Sounds don't work on the 319 can't even hear the APU, can we get a BSS combo pack like the 320 for the 319?

K AKAIO

extract , and move "fmod" , "plugins" , "data" & "sounds" inside the FFa320 folder

K AKAIO

Not sure why the default "AP disconnect" warning do not work . and t'ill now i think the Minimum & Hundred Above warnings can work only using the internal "DataRef" of Toliss ( wish i did not find )

K AKAIO

nope , this set will work in both engine models

Jucinaldo

Hello friends, Excellent these sounds that we found here, I'm happy to have paid and contributed to this excellent work. Today I downloaded the Sound to A320 FF, as several folders come and the installation says to just copy a folder to the A320 FF, is that correct? Is it just the file in the "SOUND" folder?

Issac Chen

The sound pack seems to have disabled the "Hundred Above," "Minimums," and 5ft callouts in the Toliss 319. If I revert to the original warning sounds, some other sounds like AP disconnect seems to disappear. Is there a fix for it or are you working on it? Thanks, really enjoy your sound packs!

Emerson Albuquerque

i'm using this sound in 319 neo, I have to select CFM or IAE sound in toliss control panel ? thanks

K AKAIO

PA sounds will be added soon for this set (like the B787)

bryann torres

Following the instructions, I do not hear any PA announcement. maybe I'm doing something wrong. any help would be great.

Kendell Robinson

I just removed the wind file and it sounds normal now. Might have been my backup sounds folder in conflict as well. So I removed it too. Thanks for all you do. This is a great experience to flight sim now.