Post "ToLiss A319_Sp(X-Plane)" by "FTSIM" from patreon

Tomas Luhrs

update for the latest a319 version plz!

Nick Gresla

hello, just one small thing, the flaps sounds in this sound pack are from the 737, not sure if that was a mistake or if it was intentional, not a big deal I just thought that I would bring that to your guys's attention

deniz

I installed v1.85 but rain gets too loud here and i cannot adjust environment or weather volume

Fil Xplane

Any chance to get an update soon? 3months ago, it seems that relms noticed this issue, in the message just above mines. Thanks for help. Regards. Philippe

Fil Xplane

Same here, there is this error msg: Couldn't find this GUID in any sound bank! 00440178-afa2-4cOe-124e6f245851

Bogdan Serban

This seems to have been fixed with the latest update, however the flaps sounds are very loud in the cockpit

relms

engine sounds are broken with update 1.9

Bogdan Serban

With v1.77 I don't notice any thrust reduction sound on the CFM engines

Leonel Muniz

Do you plan on updating this soundpack like it was done for the A321 so we don't hear outside environmental noises so loud in cockpit?

Kieran Harvey

I am also getting the could not find this GUID error, my FMOD folder looks exactly as it should including Original.bank I think this new version despite saying it is for all versions not just XP12 one isn't. It seems to crash XP11 version. I rolled back to 1.75 all good with that one in XP11.

Kelvin Keeble

I have the same problem, crashes to desktop and cant load a/c, i followed the steps over and over and deleted it and started fresh but again crashes, please help. all of the above files are in the new fmod folder with the master copied and renamed my error is it saying it could not find this GUID 27e7d3fd-65fb-4edb-92d6-1671f88830af

K AKAIO

check the Toliss engine volumes on the ISCS screen

Giordano Corradini

Hi, i'm running XP12.01r1, I installed the pack and i'm running into some issues (had this pack on xp11 and it was perfect) Inside the cockpit external sound are exagerated (especially when trucks are around) and i can't hear engine spool up ptu sound etc, only when taking off i hear the engine but very low and far, something is off, can you check? Thanks

Duncan Conduit

It's not it's for both

Jess

It sucks that v1.76 is for XP12 only but im glad it works at least.

K AKAIO

-Delete All the "#" #BEGIN_SOUND_ATTACHMENT #EVENT_NAME /Systems/LMLGBrakeFanExternal #VEH_XYZ -3.8 -2.0 1.04 #EVENT_START_COND AirbusFBW/fmod/sys/brakefanvol >= 0.03 #EVENT_END_COND AirbusFBW/fmod/sys/brakefanvol < 0.02 #END_SOUND_ATTACHMENT #BEGIN_SOUND_ATTACHMENT #EVENT_NAME /Systems/RMLGBrakeFanExternal #VEH_XYZ 3.8 -2.0 1.04 #EVENT_START_COND AirbusFBW/fmod/sys/brakefanvol >= 0.03 #EVENT_END_COND AirbusFBW/fmod/sys/brakefanvol < 0.02 #END_SOUND_ATTACHMENT - Result 👇 BEGIN_SOUND_ATTACHMENT EVENT_NAME /Systems/LMLGBrakeFanExternal VEH_XYZ -3.8 -2.0 1.04 EVENT_START_COND AirbusFBW/fmod/sys/brakefanvol >= 0.03 EVENT_END_COND AirbusFBW/fmod/sys/brakefanvol < 0.02 END_SOUND_ATTACHMENT BEGIN_SOUND_ATTACHMENT EVENT_NAME /Systems/RMLGBrakeFanExternal VEH_XYZ 3.8 -2.0 1.04 EVENT_START_COND AirbusFBW/fmod/sys/brakefanvol >= 0.03 EVENT_END_COND AirbusFBW/fmod/sys/brakefanvol < 0.02 END_SOUND_ATTACHMENT

Troy Salisbury

newest download didn't work, said it was missing a GUID and crashed the sim....UGH back to the previous version and undoing my work ...update, so apparently trying to have default brake fan is what is making it crash. So maybe doing it wrong, but i followed what was said in the file but it crashes everytime

Paul

broken, keeps crashing sim. happening a lot lately with your new releases.

K AKAIO

yes , it also works in the previous versions

Chris3DX

This is for XP12 as well right? assuming since its for 1.7+

K AKAIO

after the installation you must find inside the "fmod" folder : a321.snd a321_StdDef.snd CFMEngines.bank Dynamics.bank Effects.bank GUIDs.txt IAEEngines.bank LEAPEngines.bank Master Bank.bank Original.bank ( This is the defaut toliss "Master Bank.bank" file renamed ) PA.bank PWEngines.bank Warning.bank Weather.bank 👉 if the "Original.bank" file is missing you get a CTD

juergen wandrack

my sim craching with this mode and also with the a321 soundmod problems with the banks with toliss

K AKAIO

Will be ready before the end of this Month

Filip Blažek

When will be version for Toliss A319 1.7?

K AKAIO

2 Chimes ? Nope not normal - CFM/IAE v1.74 & NEO v1.75 was Tested again and that bug did not happen 🤔 Dose also the Avionics Fan are Rebooted after the Chimes ? - Yes ! 👉 That Bug usually was fixed on latest version so make sure to replace the "xLua" folder with a new one from "S-Pack/plugins" - No ! 👉 Maybe something else or it is a Default toliss sound ( usually disabled )

Kevin

When clicking external power button to turn off and switch to apu power, two dings sounds, is that normal ?

André Dilio

Please! Update the FFA320 CFM SOUNDS!

K AKAIO

i think the "Original.bank" file is missing inside the fmod folder ( See the instruction inside the "INFO.pdf" file )

K AKAIO

new update is uploaded (v1.74) , sorry for the delay

Stefan Bradtke

Hi, I am running the latest version of the Toliss A319 Toliss v1.64. I downloaded V.173 of the Soundpack (CFM/IAE) Downloadlink. Do I need the Hot-Fix as well? If so I don't understand the section with "Don't forget to make a new copy of the updated Tolis "Master Bank.bank"... I already did this with installing V.1.73 !? The hotfix has no Master Bank file. I hear the Seatbelt sing chime twice. I have no problem with the Sound for the A321. Maybe you can tell me how to install it with a hotfix or not. Thank you and have a great day!

Miles Burgess

Every time I try to load the A319 with this sound pack, I get the error "Couldn't find this GUID in any sound bank!" followed by a long string of letters and numbers, and the sim crashes. What am I doing wrong?

K AKAIO

1/ There is a simple bug on the chimes sounds (Duplicated) , A Hot-Fix will be ready soon 2/ Will Check the Pack noises ( without BSS ) 3/ The Warnings added are the default ones of Toliss , if something missing then it is from their Part

Rafael Mocochinski Freitas

Thanks for those sounds, they're great! Three things, though. I've experimented to use it with BSS and the cabin chime sounds are gone, the PACKS in medium flow got a strange chiming noise, very distant but it gets really annoying, so I always leave it on LO to not hear this chiming noise and there's a missing 'clunk' before the A/P disconnect triple tone.

K AKAIO

1/ After install you must have inside the "fmod" folder those 10 Files (CFM Version) : a319.snd a319_StdDef.snd CFM56Engines.bank Dynamics.bank GUIDs.txt IAEEngines.bank Master Bank.bank Original.bank Warning.bank Weather.bank 2/ Chimes/pings Yes , i found the issue and it will be fixed ASAP You can Fix it Though by yourself , it is easy ; - Open the "a319.snd" file with NotePad - Delete this Parameter ( found on the Last Lines ) 👇 BEGIN_SOUND_ATTACHMENT EVENT_NAME /Speakers/CabinPing VEH_XYZ 0.0 2.0 -10.0 EVENT_START_COND AirbusFBW/fmod/env/cabinChime > 0.5 END_SOUND_ATTACHMENT

Yngve Giljebrekke

Hi! Just joined today and installed this pack. Only issue I have is double pings (it plays cabin call and seat belt/no smoking pings twice, and with different tones). I followed the install guide (minus the fmod.1-step, because skipping it did away with the CTDs I was having)

K AKAIO

You made a modification ? , upload your "a319.snd" file to my mail address to check it out ( kairivindrix@gmail.com )

zhaoqi

Hello

zhaoqi

Hello, after I modified the landing gear, there is no grounding sound, how to deal with it?

K AKAIO

🖐 Hi

Giordano Corradini

Hello,

EFRAIN RODRIGUEZ

Yes I just did now and worked, thanks!

K AKAIO

Can you upload your Default Toliss "a319.snd" and the "GUIDs.txt" files to compare them with mine 👉 This is My Mail : kairivindrix@gmail.com

EFRAIN RODRIGUEZ

Still, following all the instructions and still getting CTD's all the time, something might be causing it because I had your previous A319 sounds with no issues.

Fil Xplane

It works now but I skipped this step: Rename Toliss Fmod to Fmod.1 . I have made a Original.bank copy of Toliss 319 1.6.4 Master Bank.bank . Then, I have installed the sound pack and put Original.bank inside new fmod. Then, I installed the Fix.2. There is just one fmod, no more fmod.1 + fmod.

Fil Xplane

me too

Fil Xplane

Same error message here

Fil Xplane

I have the same issue, even after the fix. Impossible to make it work. It seems that I am not the only one, I thought I did something wrong. Same error message with Toliss 1.6.4

EFRAIN RODRIGUEZ

Tried the fixed and still getting CTD's

Redeniel Martin

After using the fix it says "Couldn't load the sound bank! Warning.bank"

EFRAIN RODRIGUEZ

Ok thanks I saw ur post of the update just now.

K AKAIO

fix wil be ready in a few

EFRAIN RODRIGUEZ

Hello, today after installing the latest update the sound files will create a CTD again, can u check please? Thanks

Giordano Corradini

I had the same problem, i was about to ask the same here

William Tocher

The new Toliss A319 version 1.6.4 giving issues to anyone else? After installing the sound pack I get "Couldn't find this GUID in any sound pack"

K AKAIO

The error happen on the CFM/IAE set when using the "Enable PA" configuration ? If yes ! then use this Fix : https://www.patreon.com/file?h=30926145&i=9758541

Brett Leonberger

I just did a fresh install of the aircraft and this soundpack and I'm receiving error Couldn't load the sound bank! Warning.bank

K AKAIO

shoot ... will fix it soon as Possible

EFRAIN RODRIGUEZ

I have the same issue even with the new update any ideas?

K AKAIO

Yes it was fixed , thanks . New Link will be available very soon ( +1 Day )

Felix Fickert

Hello, my Question from 4 weeks ago still exsist. can you help pls? :) i get an error message on loading screen: "Couldnt´t find a GUID for this event name! event:/Systems/LMLGBrakeFanExternal I remove the "#", like in the description....can you help? In the A321 is no error message, but also no brake fans. thanks a lot :)

K AKAIO

Can't tell exactly , but the Fuel Pump sound is already added on the Pack (it is also a Low humming noise at the wings )

Jacob Webb

One thing I've realised that is missing is the noise of what I assume is the fuel pumps? It comes from the wings and is sort of like a humming/buzzing. You can hear it here in the background: https://youtu.be/Akgp5-qqAyU?t=76

K AKAIO

All Noted 👍 , will try those situation on the Default sounds then make the adjustments .

Guillermo

Just an opinion. Sounds are ok but default Tolis a319 cfm sounds much better in terms of : replay, cabin inside while cruising, decelerating etc. I mean that in replays sounds are very low, in cruising wind air or ''air sound'' is too loud ( no sound of engines ) and when decelerating for descen for example also no sound of engines in idle. Also, some plugins in my case stop working with this sounds. Could you please update this aspects, would be great. Thank you

Felix Fickert

i get an error message on loading screen: "Couldnt´t find a GUID for this event name! event:/Systems/LMLGBrakeFanExternal I remove the "#", like in the description....can you help? In the A321 is no error message, but also no brake fans. thanks a lot :)

K AKAIO

yes it can , for now only a configuration for Toliss321 was added 💡 The Problem with BSS that their Engine sounds can not be disabled "by default" when changing the engines types (CFM , IAE .... )

rudy benders

do these sounds work with the bss a319?

K AKAIO

Fixed is ready 👍 , Re-uploading very soon after few more tests

K AKAIO

i found another "Dataref" for the GPU , fix will be ready ASAP

Nicholas McGee

I am having this issue too with the external power constant power clicks. Were you able to find a fix? Thanks! Added: I just found out how to stop. There is an Jetway External Power option on SAM V3. I turned off and that stopped this issue.

Matrosov

I know what it is :) AirbusFBW/ElecOHPArray. It's an array number 3 is a GPU Lights are AirbusFBW/OHPLightSwitches is an array as well Landing and nose lights are 4, 5, and 3 Taxi is 6 and 3

K AKAIO

🧐 Will try to find and use another "Dataref" for the GPU Power.

Matrosov

When ext power button is pressed gpu_on dataref changes to one. However it appears that when strobe or left landing light switches are turned off they attempt to switch that dataref back to zero I can see the flickering of that dataref value. All the lua scripts are removed all the buttons on the joystick are unmapped. And the default version of Toliss 319 has no issues. Here's another video of showing dataref tool values. Thanks a lot for helping me trouble shoot it. https://drive.google.com/file/d/1sqOewjfI5KfbgWUyghC24ehl-CLspQLS/view?usp=sharing

K AKAIO

Good thinking recording the video 👍 ( indeed it is a strange bug ) 👉 We Need to Debug the issue on your Machine ! How ? : 1/ Download "Datareftool" and extract it inside the aircraft's plugins folder . https://github.com/leecbaker/datareftool/releases 2/ Paste this line on the "Datareftool" search bar sim/cockpit/electrical/gpu_on 3/ watch the value of the "Dataref" when it changes . >> when switching on the GPU it must be = 1

Matrosov

Gremlins Indeed. I made sure that I removed all my lua scripts from the lua folder. Unmapped all my joystick buttons And it is still there. The plane only has your soundpack no BSS sounds. If both of them off I get that sound, I'm guessing it's a bus switching sound if one of them is switched on the sound goes away. Here is the link to the vide I recorded that illustrates it. Sounds are awesome by the way thank you for your hard work :). https://drive.google.com/file/d/1ltEoafEQJd4ObtjSfnh5BFusJUV-WV7e/view?usp=sharing Default plane with no sound packs works fine.

K AKAIO

((👀)) maybe it is hunted 👻 ? - Are you using any other addons ? , try to disable them and test it again

Matrosov

Hi, I have a strange repeating sound when I turn on the external power switch I think it is somehow interfering with a strobe switch. If I turn strobes off I get repeating switching and no avionic fan sounds. But if I flip strobes to on everything works normally.

K AKAIO

Yes + New PW1000 sounds

paripat luenam

Hi in the next update will you add the brake fan sound?

K AKAIO

The IAE sounds are almost the same but will check if something new not updated for the A319

alexcolka

Hi are you going to update the A319 sound pack like the A321? Those CFM and IAE engines on the A321 sound amazing, the spool, etc., a much needed improvement in the A319.

K AKAIO

All X-Plane Volumes are 100% ?

Miguel Perales

hi im having issue where i cant hear rollout sounds on takeoff or landing. same problems with toliss a321. any help? it might just be too quiet?

K AKAIO

sorry for the Delay , What overhead buttons ? Hyd , Elect , Bleed buttons ? All Positions of the Thrust Lever are not working ?

Cristóbal López A.

hello, i can't hear the thrust levers and ovhd pannel buttons... how can i solve this?

K AKAIO

For Private conversation ? you can use the Patreon's direct message ( creator message )

EFRAIN RODRIGUEZ

Oh wow thanks and appreciated. I have another question about other sounds, u have an email?

K AKAIO

using NEO Mod from the x-plane.org

EFRAIN RODRIGUEZ

but thats for another mod? because on the 319 is only IAE or CFM, maybe im missing something?

K AKAIO

yes , the Page is for Toliss A319 sounds only

EFRAIN RODRIGUEZ

the (LEAP/PW) is also for toliss?

Martial Blaizot

Thank you yes I tried typing it and it wouldn't work but it did eventually by copying and pasting it.

K AKAIO

Password is : FTSiM+Sounds

Martial Blaizot

The password provided does not work for some reason. The PDF file cannot be open with the password provided.

K AKAIO

Here : https://www.patreon.com/posts/tolissa321-sp-45375100

William Tocher

May I ask does this "(LEAP/PW)" work on the A321 as well? If not, is there one for the Toliss 321? (I don't have the BSS)

K AKAIO

Every Warning sound parameter is added from the default configuration also not sure about the trick on the a319 but it works on the a321

Nicholas McGee

The flaps and almost everything is working as expected. I tried your trick on the MDA and DH but not getting +100 and minimums call. Is that supposed to be working? Thanks again!

Nicholas McGee

Are you able to provide the same fixes for the A319? The flap hydraulics keep repeating at flaps 1 and the +100 and Minimums calls are not working. I tried your trick from https://youtu.be/l2IBcX-9dfE. Thanks again!

K AKAIO

Delete and re-install the "xlua" folder found inside plugins

Ипполит Тушельман

I do not hear sounds (detent) when moving thrust levers control. What could be the problem?

K AKAIO

Please use the 2nd Fix ; https://www.patreon.com/file?h=30926145&i=7991562

Sebastião Giacheto Ferreira Júnior

I don't hear GPWS callouts (2500 / 1000 / 500... retard etc..). I think that GPWS fix is for that, problem is, that I also need the "NEO-NoCFM" fix, as the GPWS fix still references the CFM / IAE Banks (Using the PW/LEAP version)

K AKAIO

😆 , yes the Pop-out MCDU do not have sounds because there is no "Datarefs" shared for its buttons by Toliss only the Regular MCDU have

Alex Smith

Couldn't find anyone else mentioning this, but I think there may be an issue with the MCDU pop-out sounds. It seems only CLR and +/- button work; every other button is silent when pressed or when using the keyboard. I tried digging through the files myself for a solution but I really have no idea what the hell I'm doing. Edit: this is a Toliss issue, isn't it... I recall hearing about the pop-out MCDU not working with shared cockpits. Guessing the pop-out MCDU doesn't actually fire button-press commands to utilize?

Waldo CB

Thank you!

K AKAIO

Default install ( No PA ) 1/ Rename the Default Toliss "fmod" folder 2/ Open "\TA319CFM-IAE(v1.7)\S-Pack" and move the "fmod" , "plugins" & "sounds" inside the Aircraft folder 3/ Download My copy of "Original.bank" file and extract it inside the new installed "fmod" folder "Original.bank" file : https://drive.google.com/file/d/1Uvueb-vuStTmlYFIeReTVjA8Ls7-JZ7U/view?usp=sharing To Enable PA : - Open "\TA319CFM-IAE(v1.7)\S-Pack\Enable PA" and move the "fmod" inside the Aircraft folder

Waldo CB

Sorry guys, if I want to get all FTSim+ Sound which config I should choose. Even following the manual, I can find several PA folders and I believe that I messing it up. Could you clarify the installation process? Thank you.

Jake

Nevermind i think i hear them, they are just quiet

Jake

I cant hear any flaps sounds

Alex1985

and the push button sound for FAC, ELAC etc is missing (left flight control buttons on overhead panel)

Alex1985

The GPWS sounds don't work anymore and yes, I have created the original.bank

K AKAIO

Try it ! and let me know is there any Bug , always Make a backup of the Default fmod folder

Waldo CB

Is it compatible with the v1.6? Thank you

K AKAIO

Test again a looks fine , maybe Low FPS ? it can cause that . if you can record a short Video showing the bug then will check it out more

Jake

Flaps sounds are glitched.

K AKAIO

"CFMEngines.bank" is used only in A321 !! , The "CFM56Engines.bank" is for A319 , How to install CFM/IAE sounds : - Backup then Remove any "fmod" folder found inside Toliss A319 main folder - Download the(CFM/IAE) v1.62 - Open "TA319CFM-IAE\S-Pack\" then move "fmod" , "plugins" & "sounds" inside Toliss A319 main folder > To Enable the "Default " Toliss Warning sounds ; Open "\TA319CFM-IAE\Def-Toliss\" and move "fmod" inside Toliss A319 main folder ( overwrite the 3 files )

Seatback Pocket

Yep. Still same error message. Clean installation of 319, following precisely the steps outlined in A, B & C. When I load up the aircraft I get the following error message: Couldn't load the sound bank! CFMEngines.bank The original.bank is in the fmod folder that is created from your S-Pack folder. 1.62 works just fine following the instructions.

K AKAIO

the Latest CFM version for Toliss A319 is v1.63

Seatback Pocket

Clean install of aircraft and soundpack file, receiving the error: "Couldn't load the sound bank! CFMEngines.bank" with v1.72 in the A319 (no BSS present)

K AKAIO

there is 2 Rain Parameters on x-Plane and the used one by fmod is > sim/weather/precipitation_on_aircraft_ratio which it read only the Rain droplets on the aircraft but not the environment ( like airport or other Location )

Saadh Aatif

This is an amazing soundpack! One issue I'm having is that I'm hearing thunder when there's a storm, but when it's raining there's no rain sound. Any ideas why?

K AKAIO

Bank Angle Warning Horn (not a call ) , is it too loud

Kieran Harvey

There is a loud continuous chime/ringing when in steep turns is this expected?

K AKAIO

Are you using "Def-Toliss" configuration ? If yes ! : check the ISCS volumes maybe Low ? If No ! : then Try use that configuration , it will enable the Default in Toliss Gpws

HOWARD M SMITH

There is no GWPS sound when approaching terrain or anything like that. All I get is the xplane warning message.

K AKAIO

🤔

Luke Langlais

cockpit fan sounds are bearly audible, the cabin is okay though, the user interface is at 100%

K AKAIO

The V1.62 was tested in the Toliss319 v1.51 !!

Δημήτριος Μαστρογιάννης

Unfortunately no sound works. The version of ToLiss A319 I use is ToLiss319_V1p5p1. Sounds may not be compatible with this version of ToLiss A319.

K AKAIO

in the v1.62 ?? ** The v1.61 is for the Toliss a319 v1.4 >> Check the ISCS volumes and the x-Plane's

Δημήτριος Μαστρογιάννης

Aircraft Exterior sound not working (no sound at all)

Martial Blaizot

Thank it is absolutely fine now it works brilliantly m. Thanks for the time and effort you make to building those packs they are brillant!

K AKAIO

Try to Reduce the "Aircraft interior" Volume to reduce the Interior Engine sounds ,

Martial Blaizot

Yeah kind of I feel like I am outside the aircraft when I am in the cockpit lol :) thanks for your reply. I will try the v1.61 thank you very much

K AKAIO

Sounds Like the Exterior ?? if Not !! : Well , that because many Requested the interiors to be Louder >> Try using the "v1.61" , its a bit different

Martial Blaizot

Hi, thank you for providing us with such amazing sound packs!!! I flew today with your updated pack and I do have one question though. The engine sounds seem to be super loud...I can't remember flying in an A319 and being able to hear the engine that clearly lol. Is that normal or have I missed something?

K AKAIO

New configuration (Engines + warnings only) : https://drive.google.com/file/d/1CWuaenZPlv-ztSvku7ObXmUdgYVD-3yb/view?usp=sharing

Kiba67

Hello, thank you very much for your incredible sound packs ! I tried to install this pack while keeping the BSS one and therefore I followed the instructions + your note "Using BSS+Fmod". However, on startup, X-Plane crashed with a message "Couldn't load the sound bank! CFMEngines.bank". -EDIT- I managed to get it working, by modifying the a319 "bss+fmod" configuration file with Mixers + Interior + Exterior from the new 1.6 configuration file. Sound seems to work, however there are many sounds which disappeared, like the Hyd PTU, the chimes (No smoking, FSB, Cabin call), Height callouts, Retard callout

K AKAIO

check Toliss ISCS Environmental volume

Frank Hallangen

I'm having problems with there being no touchdown sounds. Any fix to that?

K AKAIO

https://www.patreon.com/posts/a320neo-sp-34039347

Hayden Hargleroad

I just tried to download the neo PW sounds and mega says The file you are trying to download is no longer available. This could be due to the following reasons: The file has been removed because of a ToS/AUP violation. Invalid URL - the link you are trying to access does not exist The file has been deleted by the user.

K AKAIO

User interface volume is at 100% ?

LeonP

I Have no Fan sounds inside the Cockpit and the Avionics Fan Outside is too quiet

K AKAIO

noted !

K AKAIO

Well , The Terrain Warning system is linked to the internal Terrain Radar Map ( i have not Data for it ) , so i done some effort and a came with the closest parameter that match this warning but it wont be accurate as the terrain Radar shows !

Vojislav Dabic

Uh, to me Terrain sound is still not working. I did everything as instructed, deleted the files from Toliss_Custom and added spack deleted the previous xlua folder and set the volume sliders. Has anyone have the same problem?

Matthew Christopher

I have duplicate "20" and "retard" callouts but the other ones are fine. I have removed the sounds from ToLiSS_Custom and also set the ISICS volumes as required.

K AKAIO

it's initially Fixed but not yet uploaded , the updating is still in progress ...

Vojislav Dabic

no Terrain, Glideslope, Pull up sounds. When will you fix?

K AKAIO

i have replayed here but i think the message is not saved somehow ! . - Answer : this fmod set was made to be a "standalone" like , it do not require any other sound addon to work but some user request an option to use it with the "BSS" Pack > so i made a new configuration to enable only the fmod engines & weather sounds , therefore you will have to restore the "Toliss_Custom" files to their orignal location to re-enable the Toliss cockpit & warnings sounds

K AKAIO

yes there is , it didn't work ? . currently updating this set and will check it out more

Vojislav Dabic

There is no PULL UP sound?

Nicholas McGee

I am having another issue. Using with the BSS Sound pack there are no Call Outs, fire test sounds, or PA sounds. I followed all instructions. I am pretty sure I did not miss anything. I am kind of confused if you even need to use the BSS Sound pack in junction with this Fmod?

K AKAIO

only on Replay ? i did not fully test it in this Mode ( only for less then 20 min ) . But if it always exist ! that maybe because i have reduced the Exterior view distance the last time

Nicholas McGee

I am not sure if it is the replay but the exterior fly by sounds are really quiet. Otherwise a lot better than default or with BSS Sounds. Not the Still is Spot flyby by, like at the end of the runway or to the side when the plane flies by it is really quiet.

K AKAIO

Always select the engine ModelsCFM56 or IAE on the ISCS page

Roberto J. Rivera Arroyo

the engines sounds dissaopear sometimes

K AKAIO

Nope , only after making some editing on the fmod project ( will reduce a bit the sound filtering added on the Rear & Side View )

uj

This sound pack is amazing, I've spent many hours in CFM equipped 320 aircraft and it sounds just like it! One thing though, when I'm sitting behind the wing in the cabin it is much too quiet, you can barely hear the engines. Is there any easy way to adjust the volumes at specific areas or is it more intensive than that?

K AKAIO

not sure why , try to restore the BSS "set.ini" file then reduce the engines volumes using the "BSS volume Control" found on the "plugins manager"

Pa Bas

If I delete those line as mentioned for BSS, XP crashes.

K AKAIO

BSS Configuration added

Asher Pramono

would there be any update that would work with the BSS soundpack?

K AKAIO

Sound set fixed & re-uploaded

K AKAIO

Yes !! after landing , Currently fixing this bug . it was correctly configured to be turned off on the ground but strangely sometimes it return to work 😣

Seatback Pocket

Downloaded the new ToLiss pack that you released today and I'm getting a "retard, retard, retard" call out on initial break away thrust for taxi and when setting the throttle into the flex detent. When I lift off the warning goes away.

theparadoxdoge

Its constantly saying pull up

K AKAIO

yes , sometimes it wont make a big noise depending on the landing (soft/hard) , it will be fixed on the next update (v1.5)

Ashwath

hi...there doesn't seem to be any ground touchdown sounds even in the full version. Is there something missing?

K AKAIO

- Check the Copilot & Radio volumes - Manually Select the engine Type on the ISCS - Try the configuration above "TA319Config2.zip"

WebPlayz

Hi, I just downloaded this and when I install the soundpack I get no sounds for my engines but everything else works.

K AKAIO

All Neo sounds in the A320_Neo post here : https://www.patreon.com/posts/a320neo-sp-34039347

Leostixx86

Been A member for awhile now. I am trying to redownload the Toliss A319 NEO soundpack and MEGA is saying the it is no longer available. Looking at previous comments it seems as though this has been a issue for at least a month. Is there another way I can get the Toliss A319 Neo soundpack? Thanks

K AKAIO

If Any having Button clicking issues when using GPU you can disable its sound by : - opening the a319.snd or a321.snd file with "notepad++" - delete this entry : EVENT_START_COND DELTA=AirbusFBW/ElecOHPArray[3] usually found on the line n°533 (a321) or n°388 (a319)

K AKAIO

FTSim+ !! think this will inverse the sound types ( CFM model will get IAE & the same for IAE ....)

K AKAIO

do you use any extra addon ? maybe it caused this issue

Jacob Webb

To get this to work properly I had to change the engine stuff to "AirbusFBW/EngineTypeIndex == 1" and "AirbusFBW/EngineTypeIndex != 1" for CFM. For IAE "AirbusFBW/EngineTypeIndex == 0" and "AirbusFBW/EngineTypeIndex != 0".

Cody Sheppard

As soon as the aircraft loads up no power or anything there is a constant clicking sound

K AKAIO

only Fmod , if you install BSS you'ill hear both sound sets !

Kenny Myers

Quick question. I am doing a fresh install of v1.4. Do I need to install the BSS first or can I just use the FMOD set?

Ólavur Brekku

Link stil down ☹️

K AKAIO

yes , and they are not used for Toliss . For more info see above on "Notes\Volume controls"

Fabrizio Girelli

Hello! is it normal that i can't change 'Aircraft Interior' and 'Exterior' volume in the XP11settings? Toliss menu continue to disable it, can i leave it at 0?

K AKAIO

Link fixed !

K AKAIO

Accidentally deleted the wrong files from the Host , Re-Uploading ....

Ólavur Brekku

same here the mega file for pw has bin removed

Peter

Works now. Thx. :D

K AKAIO

You can't download from Mega.nz ? , try again later . if not ! i can re-upload it to Google Drive

Kieran Harvey

I have signed up to get the full A319 NEO engine set and cannot due to the file not being on MEGA? :(

K AKAIO

!! it being mentioned that Toliss fixed thier sounds , so ... 1/ if you want to keep the Fmod warning sounds do not edit anything ! 2/ if you want to use the Toliss warning sounds , you need to restore the files below to their orginal location ; MiscWarn , GPWS , GenCockpitSounds & ApproachCallouts . then delete the # Warning sounds #######

Shane Smith

Just checked the Toliss A319. AirbusFBW/EngineTypeIndex is still there with a value of 0 for IAE or 1 for CFM.

K AKAIO

also to disable fmod warning sounds just open the A319.snd with notepad++ and delete all the line below : > # Warning sounds #######

K AKAIO

i think they disabled this DataRef used to switch between engine sounds : "AirbusFBW/EngineTypeIndex" > use this configuration but you will have to manually select engine type : https://www.patreon.com/file?h=30926145&i=5590830

MrSwedishPiano

The same issue here. I updated my Toliss a319 to version 1.4, and no engine sounds, all other sounds word

K AKAIO

1/ All the sounds are not working ? > x-Plane volume sliders to 100% ? , Radio , Copilot & user interface > Delete the old "fmod" folder before placing the new one > did you moved also the new "plugins" folder inside tolissA319 ? (it include xLua ) 2/ Only Engine sounds not working ? > Select engine type via Toliss ISCS

nicolas bono

sorry sir...but i delete the files eng 1a eng 2a etc... or mantein this? i follow your istructions but dont work... i use the xplane 11.50... but i repeat with the free version the sound work....

K AKAIO

Use only "Radio" and "Copilot" volumes ! , then edit the "Environmental" on Toliss ISCS screen and save Preferences .

nicolas bono

I discovered another thing that the sound of the 'paid' version does not work, while the free version is fully functional. in the 'paid' version the interiors can only be audited the exteriors are a problem

nicolas bono

i can't control the volume from the xplane menu because toliss takes the command

Brian Kuragiman

Figured it out. You CANNOT be in Automatic engine selection mode. You have to pack one.

Brian Kuragiman

Am I missing a step? I get no engine sounds and I cannot adjust XPL's sounds because the ToLiS resets them to its own desires?

K AKAIO

You can switch CFM/IAE via Toliss ISCS Screen , you don't need to create 2 aircraft folders

K AKAIO

on Toliss V1.3 ? , Radio and Copilot volumes are 100%

Praanot Kokkate

Hey can someone pls help - 1. do I have to create two folders of the aircraft - CFM and IAE? (I read it somewhere) - or do I just install this and I can switch between CFM and IAE sound set?

lukejelse04

Hi, for some reason i can't seem to get any engine sounds in the toliss A319, yet I can in the A321, any idea why?

K AKAIO

Link for CFM/IAE is added for Toliss V1.3 ,

K AKAIO

the new version for Toliss V1.3 it's on the iAE sound set , only the older Toliss v1.2 is not updated

K AKAIO

it's was added in the new IAE sound set

J.Ramsey7

Please update the Toliss v1.3+. No file available.

Fernando Carmel

No file available

Jonathan Karakas

thanks so much , works amazing!

K AKAIO

use only the Radio & Copilot sliders ( shown in the XPL Vol controls.png )

Jonathan Karakas

Hi , sounds work amazing inside cockpit, but no sound outside? checked all the sound settings provided in the instructions but still nothing on outside. get a toliss message saying keep the sounds at 0. I am running the Vulkan update btw.

Karl Childers

I am sure this will be updated to work with *Vulkan*. Spock is dead, so Vulcan is right out...

Nils Wachtmeister

this is cause to Toliss reported with vulcan update a lot of sound links in the params (as you see) are broken

K AKAIO

This related to the Aircraft Package not Fmod , ( like a corrupted Aircraft update )

Anton Shlain

I don't get engine sound with 11.50 and A319. (Someone mentioned on FB that A321 mod works well with vulcan). Here is errors from log: 0:00:30.761 I/SND: This aircraft is using FMOD in PARTIAL mode. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 304 0:00:30.761 E/SOUN: Param name AirbusFBW/FireExOHPArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 314 0:00:30.761 E/SOUN: Param name AirbusFAirbusFBW/HydOHPArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 324 0:00:30.761 E/SOUN: Param name AirbusFBW/FuelOHPArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 337 0:00:30.761 E/SOUN: Param name AirbusFBW/FCCSwitchArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 345 0:00:30.761 E/SOUN: Param name AirbusFBW/FCCSwitchArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 354 0:00:30.761 E/SOUN: Param name AirbusFBW/ADRSwitchArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 376 0:00:30.761 E/SOUN: Param name AirbusFBW/ElecOHPArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 395 0:00:30.761 E/SOUN: Param name AirbusFBW/GPWSSwitchArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 431 0:00:30.761 E/SOUN: Param name AirbusFBW/ADIRUSwitchArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 483 0:00:30.761 E/SOUN: Param name AirbusFBW/ManStartSwitchArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 504 0:00:30.761 E/SOUN: Param name AirbusFBW/OHPLightSwitches[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 558 0:00:30.761 E/SOUN: The sound event event:/Cockpit/Switch/PraftB has an invalid command trigger AirbusFBW/purser/aft 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 564 0:00:30.761 E/SOUN: The sound event event:/Cockpit/Switch/PrallB has an invalid command trigger AirbusFBW/purser/all 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 570 0:00:30.761 E/SOUN: The sound event event:/Cockpit/Switch/PrextB has an invalid command trigger AirbusFBW/purser/exit 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 576 0:00:30.761 E/SOUN: The sound event event:/Cockpit/Switch/PrfwdB has an invalid command trigger AirbusFBW/purser/fwd 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 582 0:00:30.761 E/SOUN: The sound event event:/Cockpit/Switch/PrmecB has an invalid command trigger AirbusFBW/purser/mech 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 588 0:00:30.761 E/SOUN: The sound event event:/Cockpit/Switch/PrmidB has an invalid command trigger AirbusFBW/purser/mid 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 722 0:00:30.761 E/SOUN: The sound event event:/Cockpit/Switch/VhFB has an invalid command trigger AirbusFBW/ATCCodeKey8 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 728 0:00:30.761 E/SOUN: The sound event event:/Cockpit/Switch/VhFB has an invalid command trigger AirbusFBW/ATCCodeKey9 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 1103 0:00:30.761 E/SOUN: Param name AirbusFBW/throttle_input[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 1110 0:00:30.761 E/SOUN: Param name AirbusFBW/throttle_input[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 1117 0:00:30.761 E/SOUN: Param name AirbusFBW/throttle_input[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 1124 0:00:30.761 E/SOUN: Param name AirbusFBW/throttle_input[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 1131 0:00:30.761 E/SOUN: Param name AirbusFBW/throttle_input[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 1138 0:00:30.761 E/SOUN: Param name AirbusFBW/throttle_input[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 1145 0:00:30.761 E/SOUN: Param name AirbusFBW/throttle_input[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 2614 0:00:30.761 E/SOUN: Sound event:/Dynamics/GRatt has a cue but no trigger condition. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 2759 0:00:30.761 E/SOUN: Param name AirbusFBW/FuelAutoPumpSDArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 2769 0:00:30.761 E/SOUN: Param name AirbusFBW/FuelAutoPumpSDArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 2779 0:00:30.761 E/SOUN: Param name AirbusFBW/HydSysPressArray[*] is missing a valid index in the sound file. 0:00:30.761 E/SOUN: snd error in file: Aircraft/ToLiss319NEO/fmod/a319.snd line 2787 0:00:30.761 E/SOUN: Param name AirbusFBW/HydSysPressArray[*] is missing a valid index in the sound file.

K AKAIO

the new release do not have warning sounds only Altitude callouts

K AKAIO

using Windows 10 ?

K AKAIO

installer fixed , restore first the ENG1B & ENG2B from "sounds backup"

Filip Chudoba

I've got weird warning sounds (for example seatbelt sign) as well... :/

Ali Baba

Can you maybe provide a link to old version? I didnt make a backup this time

Ali Baba

new update broke my warning sounds

Thierry Jabrane

Im the only who got weird flaps sound?

Bjorn Collins

New update works great!!!! although when you select only neo or only cfm, it still installs both meaning you cant use the iaes. Not a problem for me as i only use the cfms and the neos :) but maybeyou could fix this in the next update for those who still want the iaes.

K AKAIO

will look into it ..

K AKAIO

- check the "Volume controls.png" also added above , the "Gpws" volumes is controlled by the Toliss plugin .

CardaJowol

Just an FYI the Toliss has a NEO code as well like "IAE" so you can set the new sound on the NEO markings rather than IAE and you can have all 3 in the pack.

CardaJowol

Does the A319 pack account for the BSS sounds? are we going to get anything to merge the 2 like the A320 Neo pack?

Ron Johnson

PW1000 for both?

Max Hille

Discovered this A319 pack today and love the sounds. I am having trouble getting the audio levels to work though, at least announcements and altitude callout are not there for me.

P S

You are the best. Keep it up! Are you going to make a IAE sound for the A321 as well?

Alex1985

The A321 sounds are not bad for your first attempt! Can you improve the full thrust sound please! It should sound like this from the front: https://youtu.be/im32AHm0qq8?t=68