Leckiestein posts
Posts: 99
Files: 156
Slowly getting setup for the long run 👍
Its been about 8 months since I started posting to my youtube channel and started this Patreon; the change in lifestyle has been a complete shock to my space - previously my family room where we would spend our quality time and now soon to be my full-time studio. Ive been slowly doing things in the background to tune up the space and more importantly, tune up my process so I can get things done faster with the limited time I have for my hobbies. ...
What is the "Chute Tapping" SSD? This video explains it in detail
Hey Everyone, In this video, I demonstrate how Chute Tapping works to help with purges sticking inside the purge chute that can cause buildup leading to print failures. Up until now, foil tape has been the only inexpensive solution but its looks.. not so great and leaves residue behind when removed after being installed for a long time. Chute tapping, which is an option within SteinWipe Motion Control, can be enabled by adding the SteinSwitch Def...
Adding manual wipe cycles for SteinWipe
Hope everyone is having a good day!This is a MUST have for PETG printing. I've been meaning to make this video for a while now and instead of making an overly fancy one with music and flashy transitions to captivate the eye, maybe just something to get the process on video rather than nothing at all - so here it is! This video goes over the best way Ive come up with to simply add custom wipe cycles to any layer of your choosing using the free...
Much Needed Update + How-to Video on SSD's
Hi everyone!I wanted to give you all a proper update on what's happening behind the scenes with the SteinWipe project - and there’s a lot going on.First off, SteinWipe V2 dev is going really well which I've settled on calling it SteinWipe Pro. It’s still in testing, but so far it’s performing really well! There are a few final kinks to sort out, but this is shaping up to be a solid upgrade over the original hardware. Once the design...
🚨First SteinWipe V2 Update and It's a GOOD ONE
No tricks only treat! Thats right! From the time the printer receives the download to the time it's laying down filament - 15 Seconds!! All made possible by SteinWipe Version 2 and SWMC - two completely new additions coming to the project 💪More on this soon!Leckiestein
Remember the "purge out of bounds" errors in BBS?
I worked on a feature that keeps the head in motion and extrudes the set amount "Nozzle Volume" helping the purge stay tidy and less likely of sticking to the chute. This is what it looks like in action - I had lined up to do it in the Apr.28.1 release but then BBS and now Orca both throw errors when "sidestepping" SteinSwitch Definition is turned on. It can still be done with a script of course so Ill keep at it to find a solutio...
“So… no Orca Slicer, yet?”
"Why haven’t you released Orca yet?! You said April..."You’re absolutely right to ask. I originally aimed to have it out by the end of April - and here we are in June. So... what happened?Simply put? SWMC became too powerful for its own good.From the very beginning of this project, I’ve been battling file size limits. The full SWMC experience--packed with all it's features--just wouldn’t fit into a single file.Over the past mo...
🚨 New Video – Use SWMC To Save Your Printer from a Purge Disaster! 🚨
If you've ever forgotten to empty your purge bin before a long AMS print… you know how fast things can go sideways. A surprise overflow can turn into a major cleanup (or worse). 😬That’s why I just released a new video showing how SteinWipe Motion Control now includes an automatic safety feature that pauses your printer before it gets out of hand.If you’re using a small purge bin, like the compact one featured in the video, this featu...
🚨 New Video Drop! | Something Awesome Happened
Hey everyone!Something awesome happened—Makera donated a Carvera Air CNC for upcoming Leckiestein projects!Check out this new video where I share my first impressions of the Carvera Air, Makera’s new desktop CNC. And let me tell you... I’m pretty impressed so far, and I can’t wait to start working it into the mix.As some of you know, I’ve been in the trade for two decades (did my machinist apprenticeship in 2002!)—writing programs for...
🚨 New Update Video Drop – I Made Cheat Codes for Bambu Lab Printers! (lol)
Hey everyone! I just dropped a new video that I think you’re really going to enjoy—especially if you’ve been following the SteinWipe Motion Control project.These cheat codes are officially called SteinSwitch Definitions (SSDs), and they’re designed to make the SteinWipe system easier, smarter, and more powerful for everyone. If G-code has been a barrier for you in the past, this is the perfect time to jump in.In this video, I also give yo...
🚨 You Voted and Finally, SteinTrack Mains Are Now Public on MakerWorld!
Hey everyone, SteinTrack Mains is now LIVE on MakerWorld, Click Here!I wanted to start this post with a sincere apology—It’s been over a month since the community voted to make SteinTrack Mains public, and I know some of you have been patiently waiting for this release to go live to help push your own projects.Truth is—I didn’t want to just throw something together and hit publish for the sake of checking off a box.I’ve spent a lot of t...
🚨 New Video Drop – My First Big Channel Collaboration!
Hey everyone! I’m excited to share my first major collaboration here for the Leckiestein channel—and it’s a big one!Creality provided me their Raptor Pro 3D Scanner to put it to the test, and the result is a full-length deep-dive video that shows exactly how I use a scanner like this to create real-world designs in Fusion 360.This tool opens up a huge new opportunity for us on Patreon—because it means I can now create high-quality, scan-b...
🚨 Here's the Plan! Hit That ❤️ if you're down!
Thank you so much to everyone who voted yesterday! Your feedback gives me clear direction and helps ensure this page stays exciting and valuable for all of you 💪📺 First up:The image posted above shows the theme of a new video series that will serve as the new standard for everything SteinWipe Motion Control (SWMC). The concept of pasting in Cheat Codes for your Bambu Lab Printer - what do you think?! This first video will cover everything n...
🗳️New Poll ✏️ I Need Your Input! 🗳️
Hi everyone!Wow—what a whirlwind this last month has been! Between my day job, project dev, Canadian elections, and politics in general - I'd be lying if I said I wasn't exhausted! So I am taking a few days to recharge! In the meantime, the development sprint for the latest SteinWipe Motion Control (SWMC) core flew by, and I’m thrilled to say we’ve landed in a solid place. Now that the groundwork is laid and the final batch of files...
🚨 MAJOR SWMC RELEASE - CORE APR.28.1 🚨
The wait is over... kinda... This release is loaded but there is still a lot more on the way! SteinSwitch Definitions (SSD) are officially here for BBS 2.0.3 (Orca is almost here) 🔥🔥🔥 CLICK HERE for a full breakdown of how SSD works and how to use it. The SteinWipe Motion Control system has officially graduated from Beta to Stable for both P1 and X1 printers for BBS 2.0.3! For a detailed list of everything done for both of these major re...
SWMC BBS Pre-release
Hey Tier 2+ members,I just posted to the #devs channel in Discord, have a look if you want to check out what I've been working on the last month or so. I am aiming to release this at the end of the month. For the moment it's just BBS because Im finding out its easier to work backwards since BBS is very limited in what can be done. T2 and T3 patrons can have first crack at it. There are still a few features I may include but the current li...
🚨 Project Update – Why Your Patience Matters (and How You Can Help!)
Hey everyone,First off — thank you again for your incredible support! The response to SteinWipe and SWMC has been amazing, and there have been so many good conversations happening in the Discord which are shaping the next release of SWMC. It’s been truly humbling to see so many of you diving into the project, testing, and pushing your machines to the limit. Your enthusiasm is what keeps this project alive.That said, I wanted to address someth...
🚨First of it's kind file release!🚨
It's live! This release is a special one because it is not only available to supporters of all Tiers, but it is also including a brand new feature to the SteinWipe suite - SteinSwitch Definitions! I am very excited about this feature as it will change how we configure SteinSwitches allowing an array of configurations never before possible. By implementing simple definitions in the printer notes, this will be able to configure the mod from the...
🚨First Instalment Of SWMC Lite For Tier 1 Supporters About To Drop!
Hi everyone, Several weeks back I asked you guysif there was any interest in a version of SteinWipe Motion Control for non-wiper use that I would make available to all paid supporters, especially the T1 supporters who have been patiently waiting for new model files. The response was overwhelmingly positive for this project so I wasted no time and got to work on creating SWMC Lite!This month, T1 and up supporters will start getting access to the a...
Custom Pause Routine - SWMC LITE for Bambu Lab P1/X1 Machines
Included for Tier 1+ Patrons Last File Update: Apr.2, 2025 (if purchased, you can download updates here when avail.) **Important Notes Please Read: These files are not needed if you own the Dev. Pack listing Fully tested on X1 and P1 printers (AMS and non-AMS). Works in Orca Slicer 2.2.0 + 2.3.0 Works in Bambu Studio 2.0 with limited features (BBS lacks G-code ability) Must insert pause using sliced Gcode file - manual pausing through machine c...
📢 SteinWipe Update - PETG USERS!🚨
Hi everyone!As many of you know, I spent weeks working exclusively with PLA during the development of the Feb.15 Core V1 release of SteinWipe Motion Control (SWMC)— and I'm thrilled to say, based on much of your feedback, it has PLA absolutely dialed in! 💪A huge thank you to those who chipped in toward the material costsby contributing to the donation listings in the shop — your support has been much appreciated. 🙏 I've received...
🚨SteinWipe Listing Updated For Tier 1 Supporters🎉
Hi Maker Tier! This is the start to the several Maker Tier specific releases to come. Thank you all for being so patient while I work at these additional releases I am able to fork over from SWMC. This listing now includes everything you need to get started and is dubbed "The Basics" because it's everything you need to get your SteinWipe functional with the following steps!Download and open the Template Custom Gcode file in any text e...
🚨New Files Released!🚨
Hi everyone, I just finished the new SteinWipe installation tool programs and I think this should solve the complicated process that once was since launch! All SteinWipe listings have now been updated with the new goods! These files are designed to make it easier than ever to fine tune the position of where the wipe tool paths take place. This will make sure that both sides of the nozzle are getting the best possible clean and will prolong the wi...
🚀New Files Coming In This Weekend 🎉
Hi everyone, happy Friday! This past few weeks I've been chipping away at the Discord Bug Reporting list; testing and addressing the issues from last release but also addressing some inefficiencies with the installation tools provided with SteinWipe. To be honest, when I wrote the programs for these helper tools, I didn't think many people would use them but I am happy to admit I was wrong! It is so nice to see SteinWipe users taking grea...
🚨New Video To Start The Week Off🚨
Happy Monday! Just wrapped up a new videowhich covers the behaviour of Orca Slicer while using the new securityupdate from Bambu Lab. Spoiler, it's a rough experience... In other news, I'm just finishing up a few other things which I am excited to announce later this week, too! If you get a chance to head over to the YouTube video page to show this new video some love, that would be much appreciated!Hope everyone has an amazing day! Lecki...
🚀 Exciting News: New Ways To Access The Leckiestein Discord! 🎉
Hey free members of Leckiestein! I’ve got some great news—thanks to the incredible people who have boosted the Leckiestein Discord server we now have a custom link - this provoked the idea of giving basic access to anyone who wants to get move involved even if you’re not on a paid tier! This will remain available while the sever is 14 boosts or higher!As a free member, you can now join the Discord community, stay in the loop with updates, a...
🚀 Expanding SteinTrack: A New Way for Innovators to Share Their Creations!
Hi Tier 2 and 3 Innovators!It's been quite some time since SteinTrack has seen any real love, but that hasn’t stopped you all from pushing forward with your incredible storage solutions! I’ve seen some fantastic projects shared behind the scenes, and I want to take a moment to thank those of you who always check in before posting your creations out there—your consideration means a lot in keeping the integrity of this system strong.I’v...
🚨 New Mini Project Coming Very Soon 🚨
It is so hard to tell what is going on inside the little head of a Bambu Lab P1 or X1 printer, now we finally have a way to see what that extruder is doing! This is the first look at a brand new LeckieStein project!Im already testing this project putting it through the paces! When it is ready, T1 Makers will get access to printable files and T2+ Innovators will get access to the Fusion files. And Of course, if your'e still not a paid patron ...
A Special Live X1C Install Tonight Friday Feb 28
Hey Everyone! Do you remember that time not long ago when a brave patron gave me their X1Cto start on X1 coverage for SWMC before it was even called SWMC? Well, the time has come to actually make that printer more than just a machine to test code; lets install SteinWipe on that printer and deliver it back to the rightful owner! The MakerWorld model of SteinWipehas officially become an exclusive model so what better way to celebrate than to do a L...
🚀 MONSTER UPDATE RELEASED For SteinWipe Motion Control 🎉
Hey Everyone,It's finally here. The BIGGEST update to SteinWipe Motion Control EVER!🏆 This has been an absolute grind—hundreds of hours of coding, testing, and refining over the past few weeks (even though I technically only afford about 15 hours per week… funny what not sleepingcan do! 😅).This update is MASSIVE—so let’s get into the details!🔥 What’s New in This Release?💾 Avail - 28 G-Codes + 4 Presets for P1 & X1 in Bot...
